[Tue Apr 10 18:26:12 2012] Detection parameters:
  Position = (379.8, 447.5) = 12 41 39.97 32 41 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 12.9
  Background counts = 27.7
  Rate = 0.001 +/- 0.0002

[Tue Apr 10 18:26:12 2012] Off-axis axis estimate = 12.31'
[Tue Apr 10 18:26:39 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:26:39 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Tue Apr 10 18:26:39 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064
[Tue Apr 10 18:26:39 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.58"
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src33.ximg exists
[Tue Apr 10 18:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src33.csv
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Apr 10 18:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src33.csv
[Tue Apr 10 18:26:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:26:40 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Apr 10 18:26:40 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Apr 10 18:26:40 2012] Fit fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Apr 10 18:26:58 2012] Warning, spatial fit 33 centroid is now closest to src. 17
[Tue Apr 10 18:26:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:26:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:26:58 2012] Assessing source extent using major
[Tue Apr 10 18:26:58 2012] Source does appear to be extended
[Tue Apr 10 18:26:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:13 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:13 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Tue Apr 10 18:27:13 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.064
[Tue Apr 10 18:27:13 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 12.58"
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src31.ximg exists
[Tue Apr 10 18:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src31.csv
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Apr 10 18:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src31.csv
[Tue Apr 10 18:27:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Apr 10 18:27:14 2012] Fit fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Tue Apr 10 18:27:31 2012] Spatial fit model total counts = 261.992000, observed total counts = 262.000000
[Tue Apr 10 18:27:31 2012] Offset between fit and detection position for source 16 = 0.362671 pixels
[Tue Apr 10 18:27:31 2012] 261.109100 total counts/ 214.652000 bgd. counts: snr = 3.170915
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.362671 pixels
  Position = (379.4, 447.5) = 12 41 40.10 32 41 30.3
  Extent = 4.6 (3.1-6.8)", rotation angle = 0
  Source counts = 46.5 +/- 16.2
  Background counts = 214.7
  Rate = 0.0009 +/- 0.0003
[Tue Apr 10 18:27:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:31 2012] Source does appear to be extended
[Tue Apr 10 18:27:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:53 2012] XMMSAS src. selection expression = ellipse(32959.333800, 38885.266400, 277.567208, 277.567208, 0.000000, X, Y)
[Tue Apr 10 18:27:53 2012] Not overwriting source region fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src.reg
[Tue Apr 10 18:27:53 2012] Extracting stamp from image fullrun_mos2_xmm0110900201_pi300-10000_cl_sm2.00.img.gz, (363, 432) - (395, 463)
[Tue Apr 10 18:27:53 2012] XMMSAS bgd. selection expression = annulus(32959.333800, 38885.266400, 462.612013, 925.224027, X, Y)
[Tue Apr 10 18:27:53 2012] Writing fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16.gif
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/events/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0110900201/products/events/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Tue Apr 10 18:27:53 2012] Mean detx,y = (-10103.88, 7875.33) 
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/images/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src.img and ../../xmm0110900201/products/images/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/spectra/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0110900201/products/spectra/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Tue Apr 10 18:27:53 2012] Setting source spectrum file to fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Apr 10 18:27:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/lightcurves/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0110900201/products/lightcurves/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Tue Apr 10 18:27:55 2012] Not generating rmf since there are only 46 counts
[Tue Apr 10 18:27:55 2012] rmf not generated due to insufficient counts
[Tue Apr 10 18:27:55 2012] fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Tue Apr 10 18:28:40 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:28:40 2012] Error reading totcts from fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Apr 10 18:28:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:41 2012] Using photon index=1.80, rate=0.000906, arf fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src16.arf
[Tue Apr 10 18:28:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:41 2012] Updating source flux to 3.1e-14
[Tue Apr 10 18:28:44 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting