[Tue Apr 10 18:26:11 2012] Detection parameters:
  Position = (334.4, 320.1) = 12 41 55.64 32 32 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2460.4 +/- 61.0
  Background counts = 39.4
  Rate = 0.05 +/- 0.001

[Tue Apr 10 18:26:12 2012] Off-axis axis estimate = 3.04'
[Tue Apr 10 18:26:39 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:26:39 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Apr 10 18:26:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Tue Apr 10 18:26:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.95"
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 18:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 18:26:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 18:26:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 18:26:39 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:26:39 2012] Fit fullrun_mos2_xmm0110900201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:26:58 2012] Spatial fit model total counts = 3091.300000, observed total counts = 3086.000000
[Tue Apr 10 18:26:58 2012] Offset between fit and detection position for source 1 = 0.107054 pixels
[Tue Apr 10 18:26:58 2012] 2993.710000 total counts/ 1569.780000 bgd. counts: snr = 35.939269
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.107054 pixels
  Position = (334.3, 320.2) = 12 41 55.66 32 32 16.4
  Extent = 4.5 (4.3-4.8)", rotation angle = 0
  Source counts = 1423.9 +/- 54.7
  Background counts = 1569.8
  Rate = 0.03 +/- 0.001
[Tue Apr 10 18:26:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:26:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:26:58 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:26:58 2012] Source does appear to be extended
[Tue Apr 10 18:26:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:26:58 2012] Source is confused with source 2
[Tue Apr 10 18:27:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:27:13 2012] Initial guess for spatial extent in simple fitting = 4.53"
[Tue Apr 10 18:27:13 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.947
[Tue Apr 10 18:27:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.53"
[Tue Apr 10 18:27:13 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 18:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 18:27:13 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 18:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 18:27:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 18:27:14 2012] fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:27:14 2012] Fit fullrun_mos2_xmm0110900201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:27:31 2012] Spatial fit model total counts = 3078.070000, observed total counts = 3086.000000
[Tue Apr 10 18:27:31 2012] Offset between fit and detection position for source 1 = 0.002563 pixels
[Tue Apr 10 18:27:31 2012] 2981.130000 total counts/ 1557.220000 bgd. counts: snr = 36.083408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002563 pixels
  Position = (334.3, 320.2) = 12 41 55.66 32 32 16.4
  Extent = 4.6 (4.3-4.8)", rotation angle = 0
  Source counts = 1423.9 +/- 54.6
  Background counts = 1557.2
  Rate = 0.03 +/- 0.001
[Tue Apr 10 18:27:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:27:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:27:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:27:31 2012] Source does appear to be extended
[Tue Apr 10 18:27:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:27:52 2012] Counts = 1423.910000, rescaling region sizes by 2.000000
[Tue Apr 10 18:27:52 2012] XMMSAS src. selection expression = ellipse(29036.495000, 27804.620800, 553.342816, 553.342816, 0.000000, X, Y)
[Tue Apr 10 18:27:52 2012] Not overwriting source region fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 18:27:52 2012] Extracting stamp from image fullrun_mos2_xmm0110900201_pi300-10000_cl_sm2.00.img.gz, (303, 288) - (366, 352)
[Tue Apr 10 18:27:52 2012] XMMSAS bgd. selection expression = annulus(29036.495000, 27804.620800, 1844.476053, 3688.952106, X, Y) && !ellipse(25099.363660, 28192.429400, 410.196812, 410.196812, 0.000000, X, Y) && !ellipse(28575.803619, 27543.942413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26381.666947, 28401.056761, 486.070113, 356.796450, 207.820128, X, Y) && !ellipse(26914.400452, 30049.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.504000, 27228.180000, 1236.512036, 1236.512036, 0.000000, X, Y) && !ellipse(26310.458282, 27621.750702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25768.755310, 28227.702728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26880.320496, 27688.673370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30698.836731, 27527.683014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25227.044373, 28990.697083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28932.623627, 25939.911774, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 18:27:52 2012] Writing fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/events/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0110900201/products/events/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 18:27:53 2012] Mean detx,y = (-2344.56, -1022.97) 
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/images/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0110900201/products/images/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/spectra/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0110900201/products/spectra/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 18:27:53 2012] Setting source spectrum file to fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 18:27:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 18:27:53 2012] ../../xmm0110900201/products/lightcurves/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0110900201/products/lightcurves/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 18:27:55 2012] fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 18:27:55 2012] fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 18:28:40 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:28:40 2012] Error reading totcts from fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 18:28:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:40 2012] Using photon index=1.80, rate=0.0278, arf fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 18:28:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:40 2012] Updating source flux to 2.8e-13
[Tue Apr 10 18:28:44 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Apr 10 18:28:45 2012] Reading fit data from xmm0110900201/analysis//spectral/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Apr 10 18:28:45 2012] Spectral fit parameter nH value = 2.46357e+21
[Tue Apr 10 18:28:45 2012] Spectral fit parameter PhoIndex value = 2.21549
[Tue Apr 10 18:28:45 2012] Failed to get F(0.3-8.0) from xmm0110900201/analysis//spectral/fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 18:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:28:45 2012] Using Nh = 2.5e+21, photon index=2.22, rate=0.0278, arf fullrun_mos2_xmm0110900201_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 18:28:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:28:45 2012] Updating source flux to 2.9e-13