[Tue Mar 13 02:46:10 2012] Detection parameters:
  Position = (310.0, 251.9) = 0 47 26.57 -25 19 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.7 +/- 15.8
  Background counts = 23.5
  Rate = 0.004 +/- 0.0006

[Tue Mar 13 02:46:12 2012] Off-axis axis estimate = 3.47'
[Tue Mar 13 02:46:57 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:57 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Tue Mar 13 02:46:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.708
[Tue Mar 13 02:46:57 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.17"
[Tue Mar 13 02:46:58 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Mar 13 02:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src19.csv
[Tue Mar 13 02:46:58 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Mar 13 02:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src19.csv
[Tue Mar 13 02:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:46:59 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Mar 13 02:46:59 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Mar 13 02:46:59 2012] Fit fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Mar 13 02:47:41 2012] Warning, spatial fit 19 centroid is now closest to src. 49
[Tue Mar 13 02:47:41 2012] Source 47 is offset by 6.097250 and 2.334791 pixels which is larger than
2 X fitted extent = 1.116386 x 1.116386, not incorporating fit results
[Tue Mar 13 02:47:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:41 2012] Assessing source extent using major
[Tue Mar 13 02:47:41 2012] Source does appear to be extended
[Tue Mar 13 02:47:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:47:41 2012] Source is confused with source 9
[Tue Mar 13 02:48:06 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:06 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Tue Mar 13 02:48:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.708
[Tue Mar 13 02:48:06 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.17"
[Tue Mar 13 02:48:07 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src19.ximg exists
[Tue Mar 13 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src19.csv
[Tue Mar 13 02:48:07 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Mar 13 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src19.csv
[Tue Mar 13 02:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:08 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Mar 13 02:48:08 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Mar 13 02:48:08 2012] Fit fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Mar 13 02:48:40 2012] Warning, spatial fit 19 centroid is now closest to src. 48
[Tue Mar 13 02:48:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:40 2012] Assessing source extent using major
[Tue Mar 13 02:48:40 2012] Source does appear to be extended
[Tue Mar 13 02:48:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:49:13 2012] XMMSAS src. selection expression = ellipse(26918.744080, 21869.682831, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 02:49:13 2012] Not overwriting source region fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src.reg
[Tue Mar 13 02:49:13 2012] Extracting stamp from image fullrun_mos2_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (272, 214) - (347, 289)
[Tue Mar 13 02:49:13 2012] XMMSAS bgd. selection expression = annulus(26918.744080, 21869.682831, 1087.500000, 2175.000000, X, Y) && !ellipse(25096.963600, 24151.004800, 522.723215, 522.723215, 0.000000, X, Y) && !ellipse(25192.205960, 23597.336400, 302.343209, 302.343209, 0.000000, X, Y) && !ellipse(28011.731400, 19944.098400, 419.796012, 419.796012, 0.000000, X, Y) && !ellipse(29368.224140, 23035.748400, 603.113617, 603.113617, 0.000000, X, Y) && !ellipse(27592.794000, 22401.664000, 1252.064036, 1252.064036, 0.000000, X, Y) && !ellipse(29121.554400, 21868.812600, 398.543211, 398.543211, 0.000000, X, Y) && !ellipse(27305.467682, 21252.754913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.473480, 22958.455000, 273.438408, 273.438408, 0.000000, X, Y) && !ellipse(26767.594000, 23085.310000, 1220.248035, 1220.248035, 0.000000, X, Y) && !ellipse(25198.416000, 22440.064000, 664.416019, 246.309607, 112.114000, X, Y) && !ellipse(28098.089508, 21392.786469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28581.510000, 20871.592000, 1363.360039, 1363.360039, 0.000000, X, Y)
[Tue Mar 13 02:49:13 2012] Writing fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47.gif
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/events/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0110900101/products/events/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:15 2012] Mean detx,y = (-2024.42, -4294.32) 
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/images/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src.img and ../../xmm0110900101/products/images/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/spectra/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:15 2012] Setting source spectrum file to fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Mar 13 02:49:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 02:49:27 2012] rmf not generated due to insufficient counts
[Tue Mar 13 02:49:27 2012] fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47.arf exists, delete to re-create
[Tue Mar 13 02:50:17 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:17 2012] Error reading totcts from fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Mar 13 02:50:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:19 2012] Using photon index=1.80, rate=0.00433, arf fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src47.arf
[Tue Mar 13 02:50:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:19 2012] Updating source flux to 4.4e-14
[Tue Mar 13 02:50:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting