[Tue Mar 13 02:46:09 2012] Detection parameters:
  Position = (265.3, 294.0) = 0 47 40.91 -25 16 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.7 +/- 14.0
  Background counts = 24.8
  Rate = 0.003 +/- 0.0005

[Tue Mar 13 02:46:12 2012] Off-axis axis estimate = 2.43'
[Tue Mar 13 02:46:57 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:57 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Tue Mar 13 02:46:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.982
[Tue Mar 13 02:46:57 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.64"
[Tue Mar 13 02:46:58 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src29.ximg exists
[Tue Mar 13 02:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src29.csv
[Tue Mar 13 02:46:58 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Mar 13 02:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src29.csv
[Tue Mar 13 02:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:46:59 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Mar 13 02:46:59 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Mar 13 02:47:00 2012] Fit fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Mar 13 02:47:41 2012] Spatial fit model total counts = 691.415000, observed total counts = 691.000000
[Tue Mar 13 02:47:41 2012] Offset between fit and detection position for source 36 = 3.334492 pixels
[Tue Mar 13 02:47:41 2012] 686.305000 total counts/ 511.318000 bgd. counts: snr = 7.738562
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.334492 pixels
  Position = (266.8, 291.0) = 0 47 40.43 -25 16 25.6
  Extent = 15.3 (15.2-30.6)", rotation angle = 0
  Source counts = 175.0 +/- 26.2
  Background counts = 511.3
  Rate = 0.006 +/- 0.0009
[Tue Mar 13 02:47:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:41 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:47:41 2012] Source does appear to be extended
[Tue Mar 13 02:47:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:47:41 2012] Source is confused with source 33
[Tue Mar 13 02:47:41 2012] Source is confused with source 37
[Tue Mar 13 02:48:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:06 2012] Initial guess for spatial extent in simple fitting = 15.28"
[Tue Mar 13 02:48:06 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.993
[Tue Mar 13 02:48:06 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 15.28"
[Tue Mar 13 02:48:07 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Mar 13 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src28.csv
[Tue Mar 13 02:48:07 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Mar 13 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src28.csv
[Tue Mar 13 02:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:08 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Mar 13 02:48:08 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Mar 13 02:48:08 2012] Fit fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Mar 13 02:48:40 2012] Spatial fit model total counts = 1108.820000, observed total counts = 1106.000000
[Tue Mar 13 02:48:40 2012] Offset between fit and detection position for source 36 = 0.213485 pixels
[Tue Mar 13 02:48:40 2012] 1117.686400 total counts/ 1031.790000 bgd. counts: snr = 2.674110
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.213485 pixels
  Position = (266.5, 291.0) = 0 47 40.50 -25 16 25.7
  Extent = 12.6 (8.7-20.0)", rotation angle = 0
  Source counts = 85.9 +/- 33.4
  Background counts = 1031.8
  Rate = 0.003 +/- 0.001
[Tue Mar 13 02:48:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:40 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:48:40 2012] Source does appear to be extended
[Tue Mar 13 02:48:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:49:13 2012] XMMSAS src. selection expression = ellipse(23141.065620, 25264.682200, 753.096022, 753.096022, 0.000000, X, Y)
[Tue Mar 13 02:49:13 2012] Not overwriting source region fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src.reg
[Tue Mar 13 02:49:13 2012] Extracting stamp from image fullrun_mos2_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (223, 248) - (310, 334)
[Tue Mar 13 02:49:13 2012] XMMSAS bgd. selection expression = annulus(23141.065620, 25264.682200, 1255.160036, 2510.320072, X, Y) && !ellipse(25096.963600, 24151.004800, 522.723215, 522.723215, 0.000000, X, Y) && !ellipse(25192.205960, 23597.336400, 302.343209, 302.343209, 0.000000, X, Y) && !ellipse(24592.574400, 26721.932800, 394.442411, 394.442411, 0.000000, X, Y) && !ellipse(22552.275600, 26914.312000, 293.159208, 293.159208, 0.000000, X, Y) && !ellipse(22461.908356, 26405.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23101.556240, 27917.863400, 418.896012, 321.488009, 87.475000, X, Y) && !ellipse(26767.594000, 23085.310000, 1220.248035, 1220.248035, 0.000000, X, Y) && !ellipse(24269.070000, 24943.850000, 733.107221, 733.107221, 0.000000, X, Y) && !ellipse(25198.416000, 22440.064000, 664.416019, 246.309607, 112.114000, X, Y) && !ellipse(25774.567169, 27065.684021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23787.904327, 26058.225189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22006.050446, 27000.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23370.512482, 26029.383606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23646.636000, 25343.978000, 1155.728033, 1155.728033, 0.000000, X, Y)
[Tue Mar 13 02:49:13 2012] Writing fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36.gif
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/events/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0110900101/products/events/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:15 2012] Mean detx,y = (3032.24, -3756.91) 
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/images/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src.img and ../../xmm0110900101/products/images/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/spectra/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:15 2012] Setting source spectrum file to fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Mar 13 02:49:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:27 2012] Not generating rmf since there are only 85 counts
[Tue Mar 13 02:49:27 2012] rmf not generated due to insufficient counts
[Tue Mar 13 02:49:27 2012] fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Tue Mar 13 02:50:18 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:18 2012] Error reading totcts from fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Mar 13 02:50:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:20 2012] Using photon index=1.80, rate=0.0029, arf fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src36.arf
[Tue Mar 13 02:50:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:20 2012] Updating source flux to 3e-14
[Tue Mar 13 02:50:26 2012] Flag c found in src. 36 procflags, skipping spectral fitting
[Tue Mar 13 02:50:26 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting