[Tue Mar 13 02:46:09 2012] Detection parameters:
  Position = (269.2, 299.7) = 0 47 39.65 -25 15 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.6 +/- 12.6
  Background counts = 24.1
  Rate = 0.002 +/- 0.0005

[Tue Mar 13 02:46:12 2012] Off-axis axis estimate = 2.12'
[Tue Mar 13 02:46:57 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:57 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Mar 13 02:46:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Tue Mar 13 02:46:57 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.49"
[Tue Mar 13 02:46:59 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src49.ximg exists
[Tue Mar 13 02:46:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src49.csv
[Tue Mar 13 02:46:59 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Mar 13 02:46:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src49.csv
[Tue Mar 13 02:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:47:00 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Mar 13 02:47:00 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Mar 13 02:47:00 2012] Fit fullrun_mos2_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Tue Mar 13 02:47:41 2012] Source 33 is offset by 1.233077 and 2.491444 pixels which is larger than
2 X fitted extent = 0.860924 x 0.860924, not incorporating fit results
[Tue Mar 13 02:47:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:41 2012] Assessing source extent using major
[Tue Mar 13 02:47:41 2012] Source does appear to be extended
[Tue Mar 13 02:47:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:47:41 2012] Source is confused with source 36
[Tue Mar 13 02:48:06 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:06 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Mar 13 02:48:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Tue Mar 13 02:48:06 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.49"
[Tue Mar 13 02:48:07 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src45.ximg exists
[Tue Mar 13 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src45.csv
[Tue Mar 13 02:48:07 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src45_1.ximg exists
[Tue Mar 13 02:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src45.csv
[Tue Mar 13 02:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:08 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Tue Mar 13 02:48:08 2012] fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Tue Mar 13 02:48:08 2012] Fit fullrun_mos2_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Tue Mar 13 02:48:40 2012] Source 33 is offset by 1.228893 and 2.596317 pixels which is larger than
2 X fitted extent = 0.860924 x 0.860924, not incorporating fit results
[Tue Mar 13 02:48:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:40 2012] Assessing source extent using major
[Tue Mar 13 02:48:40 2012] Source does appear to be extended
[Tue Mar 13 02:48:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:49:14 2012] XMMSAS src. selection expression = ellipse(23370.512482, 26029.383606, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 02:49:14 2012] Not overwriting source region fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src.reg
[Tue Mar 13 02:49:14 2012] Extracting stamp from image fullrun_mos2_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (232, 262) - (307, 337)
[Tue Mar 13 02:49:14 2012] XMMSAS bgd. selection expression = annulus(23370.512482, 26029.383606, 1087.500000, 2175.000000, X, Y) && !ellipse(25096.963600, 24151.004800, 522.723215, 522.723215, 0.000000, X, Y) && !ellipse(25192.205960, 23597.336400, 302.343209, 302.343209, 0.000000, X, Y) && !ellipse(24592.574400, 26721.932800, 394.442411, 394.442411, 0.000000, X, Y) && !ellipse(22552.275600, 26914.312000, 293.159208, 293.159208, 0.000000, X, Y) && !ellipse(22461.908356, 26405.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23101.556240, 27917.863400, 418.896012, 321.488009, 87.475000, X, Y) && !ellipse(24269.070000, 24943.850000, 733.107221, 733.107221, 0.000000, X, Y) && !ellipse(23141.065620, 25264.682200, 1004.128029, 1004.128029, 0.000000, X, Y) && !ellipse(25774.567169, 27065.684021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23787.904327, 26058.225189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22490.441956, 28902.420013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22006.050446, 27000.996887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23646.636000, 25343.978000, 1155.728033, 1155.728033, 0.000000, X, Y)
[Tue Mar 13 02:49:14 2012] Writing fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33.gif
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/events/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0110900101/products/events/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:15 2012] Mean detx,y = (3281.43, -3113.46) 
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/images/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src.img and ../../xmm0110900101/products/images/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/spectra/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:15 2012] Setting source spectrum file to fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Mar 13 02:49:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Mar 13 02:49:15 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:27 2012] Not generating rmf since there are only 51 counts
[Tue Mar 13 02:49:27 2012] rmf not generated due to insufficient counts
[Tue Mar 13 02:49:27 2012] fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Tue Mar 13 02:50:18 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:18 2012] Error reading totcts from fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Mar 13 02:50:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:20 2012] Using photon index=1.80, rate=0.00198, arf fullrun_mos2_xmm0110900101_pi300-10000_pass1_cl_src33.arf
[Tue Mar 13 02:50:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:20 2012] Updating source flux to 2.1e-14
[Tue Mar 13 02:50:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting