[Tue Mar 13 02:46:06 2012] Detection parameters:
  Position = (303.4, 279.9) = 0 47 28.69 -25 17 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 14.9
  Background counts = 31.1
  Rate = 0.003 +/- 0.0006

[Tue Mar 13 02:46:07 2012] Off-axis axis estimate = 1.39'
[Tue Mar 13 02:46:55 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:55 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Tue Mar 13 02:46:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.094
[Tue Mar 13 02:46:55 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.12"
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src33.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src33.csv
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src33.csv
[Tue Mar 13 02:46:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:46:57 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Mar 13 02:46:57 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Mar 13 02:46:57 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Mar 13 02:47:23 2012] Source 42 is offset by 6.919338 and 2.909297 pixels which is larger than
2 X fitted extent = 3.508055 x 3.508055, not incorporating fit results
[Tue Mar 13 02:47:23 2012] Spatial fit model total counts = 898.779000, observed total counts = 897.000000
[Tue Mar 13 02:47:23 2012] Offset between fit and detection position for source 42 = 4.852736 pixels
[Tue Mar 13 02:47:23 2012] Warning, changing simple spatial fit ID from 33 to 37
[Tue Mar 13 02:47:23 2012] 859.892000 total counts/ 713.626000 bgd. counts: snr = 5.475302
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 4.852736 pixels
  Position = (299.2, 277.4) = 0 47 30.01 -25 17 24.7
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 146.3 +/- 29.3
  Background counts = 713.6
  Rate = 0.005 +/- 0.001
[Tue Mar 13 02:47:23 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:23 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:47:23 2012] Source does appear to be extended
[Tue Mar 13 02:47:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:47:23 2012] Source is confused with source 44
[Tue Mar 13 02:48:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 02:48:03 2012] Initial guess for spatial extent in simple fitting = 14.72"
[Tue Mar 13 02:48:03 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.928
[Tue Mar 13 02:48:03 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 14.72"
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Mar 13 02:48:05 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src30 appears to have run properly
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Mar 13 02:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Mar 13 02:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Tue Mar 13 02:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:25 2012] Warning, spatial fit 30 centroid is now closest to src. 44
[Tue Mar 13 02:48:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:48:25 2012] Source does appear to be extended
[Tue Mar 13 02:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:49:01 2012] XMMSAS src. selection expression = ellipse(25984.824000, 24084.552000, 883.014025, 883.014025, 0.000000, X, Y)
[Tue Mar 13 02:49:01 2012] Not overwriting source region fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src.reg
[Tue Mar 13 02:49:01 2012] Extracting stamp from image fullrun_mos1_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (248, 227) - (350, 328)
[Tue Mar 13 02:49:01 2012] XMMSAS bgd. selection expression = annulus(25984.824000, 24084.552000, 1471.690042, 2943.380085, X, Y) && !ellipse(25088.323440, 24140.928800, 518.468815, 518.468815, 0.000000, X, Y) && !ellipse(25195.232920, 23565.915000, 345.519210, 313.288009, 53.465000, X, Y) && !ellipse(24579.029478, 26703.359765, 406.000499, 357.532895, 82.331024, X, Y) && !ellipse(29366.204560, 23016.043600, 576.596817, 576.596817, 0.000000, X, Y) && !ellipse(27756.437000, 22057.467800, 377.955211, 320.744009, 1.072650, X, Y) && !ellipse(29117.972200, 21856.021540, 359.052810, 359.052810, 0.000000, X, Y) && !ellipse(27301.296600, 21208.164800, 434.857613, 434.857613, 0.000000, X, Y) && !ellipse(26552.409000, 22945.834000, 369.334411, 369.334411, 0.000000, X, Y) && !ellipse(26930.758087, 21863.244385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24274.202148, 24989.724579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.101814, 23200.824000, 876.356445, 279.094682, 359.999567, X, Y) && !ellipse(27240.321228, 22496.267090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22590.836000, 25518.454000, 2468.736071, 2468.736071, 0.000000, X, Y) && !ellipse(26570.478577, 23782.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28516.954000, 20849.048000, 1358.808039, 1358.808039, 0.000000, X, Y) && !ellipse(25642.810600, 26890.514600, 567.388016, 567.388016, 0.000000, X, Y) && !ellipse(23272.078000, 25000.696000, 1234.664036, 1234.664036, 0.000000, X, Y)
[Tue Mar 13 02:49:01 2012] Writing fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42.gif
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src.evt and ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Mean detx,y = (-3180.00, -622.99) 
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src.img and ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Setting source spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Mar 13 02:49:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:12 2012] fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42.rmf exists, delete to re-create
[Tue Mar 13 02:49:12 2012] fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42.arf exists, delete to re-create
[Tue Mar 13 02:50:14 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:14 2012] Error reading totcts from fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Mar 13 02:50:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:16 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src42.arf
[Tue Mar 13 02:50:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:16 2012] Updating source flux to 5.4e-14
[Tue Mar 13 02:50:24 2012] Flag b found in src. 42 procflags, skipping spectral fitting
[Tue Mar 13 02:50:24 2012] Flag c found in src. 42 procflags, skipping spectral fitting