[Tue Mar 13 02:46:06 2012] Detection parameters:
  Position = (279.6, 287.8) = 0 47 36.32 -25 16 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.4 +/- 14.1
  Background counts = 31.7
  Rate = 0.003 +/- 0.0006

[Tue Mar 13 02:46:07 2012] Off-axis axis estimate = 1.57'
[Tue Mar 13 02:46:55 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:55 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Mar 13 02:46:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.073
[Tue Mar 13 02:46:55 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.21"
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src24.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src24.csv
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src24.csv
[Tue Mar 13 02:46:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:46:57 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Mar 13 02:46:57 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Mar 13 02:46:57 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Mar 13 02:47:23 2012] Source 40 is offset by -6.062021 and 6.428995 pixels which is larger than
2 X fitted extent = 3.680474 x 3.680474, not incorporating fit results
[Tue Mar 13 02:47:23 2012] Source 40 is offset by 9.791749 and 1.670351 pixels which is larger than
2 X fitted extent = 6.929471 x 6.929471, not incorporating fit results
[Tue Mar 13 02:47:23 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:23 2012] Assessing source extent using major
[Tue Mar 13 02:47:23 2012] Source does appear to be extended
[Tue Mar 13 02:47:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:48:03 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:03 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Mar 13 02:48:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.073
[Tue Mar 13 02:48:03 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.21"
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src24.ximg exists
[Tue Mar 13 02:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src24.csv
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Mar 13 02:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src24.csv
[Tue Mar 13 02:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Mar 13 02:48:05 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Mar 13 02:48:25 2012] Source 40 is offset by -6.062021 and 6.428995 pixels which is larger than
2 X fitted extent = 3.646340 x 3.646340, not incorporating fit results
[Tue Mar 13 02:48:25 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 20.204964 pixels away
[Tue Mar 13 02:48:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:25 2012] Assessing source extent using major
[Tue Mar 13 02:48:25 2012] Source does appear to be extended
[Tue Mar 13 02:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:48:25 2012] Source is confused with source 37
[Tue Mar 13 02:49:01 2012] XMMSAS src. selection expression = ellipse(24274.202148, 24989.724579, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 02:49:01 2012] Not overwriting source region fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src.reg
[Tue Mar 13 02:49:01 2012] Extracting stamp from image fullrun_mos1_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (242, 250) - (317, 325)
[Tue Mar 13 02:49:01 2012] XMMSAS bgd. selection expression = annulus(24274.202148, 24989.724579, 1087.500000, 2175.000000, X, Y) && !ellipse(25088.323440, 24140.928800, 518.468815, 518.468815, 0.000000, X, Y) && !ellipse(25195.232920, 23565.915000, 345.519210, 313.288009, 53.465000, X, Y) && !ellipse(24579.029478, 26703.359765, 406.000499, 357.532895, 82.331024, X, Y) && !ellipse(22546.640600, 26915.042200, 399.313611, 399.313611, 0.000000, X, Y) && !ellipse(26552.409000, 22945.834000, 369.334411, 369.334411, 0.000000, X, Y) && !ellipse(22445.492000, 26380.526000, 307.384009, 307.384009, 0.000000, X, Y) && !ellipse(27033.101814, 23200.824000, 876.356445, 279.094682, 359.999567, X, Y) && !ellipse(25984.824000, 24084.552000, 1177.352034, 1177.352034, 0.000000, X, Y) && !ellipse(27240.321228, 22496.267090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22590.836000, 25518.454000, 2468.736071, 2468.736071, 0.000000, X, Y) && !ellipse(26570.478577, 23782.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25642.810600, 26890.514600, 567.388016, 567.388016, 0.000000, X, Y) && !ellipse(23272.078000, 25000.696000, 1234.664036, 1234.664036, 0.000000, X, Y)
[Tue Mar 13 02:49:01 2012] Writing fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40.gif
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src.evt and ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Mean detx,y = (-3139.30, -2019.32) 
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src.img and ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Setting source spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Mar 13 02:49:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:12 2012] Not generating rmf since there are only 75 counts
[Tue Mar 13 02:49:12 2012] rmf not generated due to insufficient counts
[Tue Mar 13 02:49:12 2012] fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40.arf exists, delete to re-create
[Tue Mar 13 02:50:13 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:13 2012] Error reading totcts from fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Mar 13 02:50:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:16 2012] Using photon index=1.80, rate=0.00322, arf fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src40.arf
[Tue Mar 13 02:50:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:16 2012] Updating source flux to 3.6e-14
[Tue Mar 13 02:50:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting