[Tue Mar 13 02:46:05 2012] Detection parameters:
  Position = (269.4, 288.8) = 0 47 39.57 -25 16 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.6 +/- 12.1
  Background counts = 28.9
  Rate = 0.002 +/- 0.0005

[Tue Mar 13 02:46:07 2012] Off-axis axis estimate = 2.21'
[Tue Mar 13 02:46:55 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:55 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Mar 13 02:46:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Tue Mar 13 02:46:55 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.54"
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src48.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src48.csv
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src48_1.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src48.csv
[Tue Mar 13 02:46:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:46:57 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Tue Mar 13 02:46:57 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Tue Mar 13 02:46:57 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Tue Mar 13 02:47:23 2012] Spatial fit model total counts = 593.185000, observed total counts = 590.000000
[Tue Mar 13 02:47:23 2012] Offset between fit and detection position for source 39 = 1.707586 pixels
[Tue Mar 13 02:47:23 2012] Warning, changing simple spatial fit ID from 48 to 35
[Tue Mar 13 02:47:23 2012] 601.484000 total counts/ 536.078000 bgd. counts: snr = 2.824903
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.707586 pixels
  Position = (268.0, 287.9) = 0 47 40.03 -25 16 39.0
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source counts = 65.4 +/- 24.5
  Background counts = 536.1
  Rate = 0.002 +/- 0.0009
[Tue Mar 13 02:47:23 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:23 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:47:23 2012] Source does appear to be extended
[Tue Mar 13 02:47:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:47:23 2012] Source is confused with source 37
[Tue Mar 13 02:48:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:03 2012] Initial guess for spatial extent in simple fitting = 15.43"
[Tue Mar 13 02:48:03 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.977
[Tue Mar 13 02:48:03 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 15.43"
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src39.ximg exists
[Tue Mar 13 02:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src39.csv
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Mar 13 02:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src39.csv
[Tue Mar 13 02:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:06 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Mar 13 02:48:06 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Mar 13 02:48:06 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue Mar 13 02:48:25 2012] Spatial fit model total counts = 589.810000, observed total counts = 590.000000
[Tue Mar 13 02:48:25 2012] Offset between fit and detection position for source 39 = 0.051601 pixels
[Tue Mar 13 02:48:25 2012] Warning, changing simple spatial fit ID from 39 to 32
[Tue Mar 13 02:48:25 2012] 598.540100 total counts/ 528.945000 bgd. counts: snr = 3.026031
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.051601 pixels
  Position = (268.1, 287.9) = 0 47 40.01 -25 16 38.9
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source counts = 69.6 +/- 24.5
  Background counts = 528.9
  Rate = 0.003 +/- 0.0009
[Tue Mar 13 02:48:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:48:25 2012] Source does appear to be extended
[Tue Mar 13 02:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:49:01 2012] XMMSAS src. selection expression = ellipse(23272.078000, 25000.696000, 925.998027, 925.998027, 0.000000, X, Y)
[Tue Mar 13 02:49:01 2012] Not overwriting source region fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src.reg
[Tue Mar 13 02:49:01 2012] Extracting stamp from image fullrun_mos1_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (215, 235) - (321, 341)
[Tue Mar 13 02:49:01 2012] XMMSAS bgd. selection expression = annulus(23272.078000, 25000.696000, 1543.330044, 3086.660089, X, Y) && !ellipse(25088.323440, 24140.928800, 518.468815, 518.468815, 0.000000, X, Y) && !ellipse(25195.232920, 23565.915000, 345.519210, 313.288009, 53.465000, X, Y) && !ellipse(24579.029478, 26703.359765, 406.000499, 357.532895, 82.331024, X, Y) && !ellipse(22546.640600, 26915.042200, 399.313611, 399.313611, 0.000000, X, Y) && !ellipse(26552.409000, 22945.834000, 369.334411, 369.334411, 0.000000, X, Y) && !ellipse(22445.492000, 26380.526000, 307.384009, 307.384009, 0.000000, X, Y) && !ellipse(23120.356000, 27879.588000, 432.107212, 432.107212, 0.000000, X, Y) && !ellipse(26930.758087, 21863.244385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24274.202148, 24989.724579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.101814, 23200.824000, 876.356445, 279.094682, 359.999567, X, Y) && !ellipse(25984.824000, 24084.552000, 1177.352034, 1177.352034, 0.000000, X, Y) && !ellipse(22590.836000, 25518.454000, 2468.736071, 2468.736071, 0.000000, X, Y) && !ellipse(26570.478577, 23782.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25642.810600, 26890.514600, 567.388016, 567.388016, 0.000000, X, Y)
[Tue Mar 13 02:49:01 2012] Writing fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39.gif
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Mean detx,y = (-3657.82, -2948.44) 
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src.img and ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Setting source spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Mar 13 02:49:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:12 2012] Not generating rmf since there are only 69 counts
[Tue Mar 13 02:49:12 2012] rmf not generated due to insufficient counts
[Tue Mar 13 02:49:12 2012] fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39.arf exists, delete to re-create
[Tue Mar 13 02:50:14 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:14 2012] Error reading totcts from fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Mar 13 02:50:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:16 2012] Using photon index=1.80, rate=0.00255, arf fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src39.arf
[Tue Mar 13 02:50:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:16 2012] Updating source flux to 2.9e-14
[Tue Mar 13 02:50:24 2012] Flag c found in src. 39 procflags, skipping spectral fitting
[Tue Mar 13 02:50:24 2012] Source 39 has fewer than 100.000000 counts, skipping spectral fitting