[Tue Mar 13 02:46:04 2012] Detection parameters:
  Position = (258.6, 303.9) = 0 47 43.05 -25 15 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.3 +/- 17.5
  Background counts = 23.2
  Rate = 0.008 +/- 0.0008

[Tue Mar 13 02:46:07 2012] Off-axis axis estimate = 2.92'
[Tue Mar 13 02:46:55 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:46:55 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Tue Mar 13 02:46:55 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.934
[Tue Mar 13 02:46:55 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.89"
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src15.csv
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Mar 13 02:46:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src15.csv
[Tue Mar 13 02:46:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Mar 13 02:46:56 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Mar 13 02:46:57 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Mar 13 02:47:23 2012] Spatial fit model total counts = 834.929000, observed total counts = 835.000000
[Tue Mar 13 02:47:23 2012] Offset between fit and detection position for source 25 = 0.226621 pixels
[Tue Mar 13 02:47:23 2012] 842.864000 total counts/ 778.254000 bgd. counts: snr = 2.316003
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.226621 pixels
  Position = (258.6, 303.7) = 0 47 43.04 -25 15 30.2
  Extent = 3.4 (2.8-4.2)", rotation angle = 0
  Source counts = 64.6 +/- 29.0
  Background counts = 778.3
  Rate = 0.002 +/- 0.001
[Tue Mar 13 02:47:23 2012] Spatial fit model total counts = 669.080000, observed total counts = 668.000000
[Tue Mar 13 02:47:23 2012] Offset between fit and detection position for source 25 = 0.077005 pixels
[Tue Mar 13 02:47:23 2012] Warning, changing simple spatial fit ID from 15 to 47
[Tue Mar 13 02:47:23 2012] 448.992800 total counts/ 373.445000 bgd. counts: snr = 3.909385
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.077005 pixels
  Position = (258.6, 303.8) = 0 47 43.06 -25 15 29.9
  Extent = 3.8 (3.0-5.2)", rotation angle = 0
  Source counts = 75.5 +/- 21.2
  Background counts = 373.4
  Rate = 0.003 +/- 0.0008
[Tue Mar 13 02:47:23 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:47:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:47:23 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:47:23 2012] Source does appear to be extended
[Tue Mar 13 02:47:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:48:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:48:03 2012] Initial guess for spatial extent in simple fitting = 3.84"
[Tue Mar 13 02:48:03 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.176
[Tue Mar 13 02:48:03 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 3.84"
[Tue Mar 13 02:48:04 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src15.ximg exists
[Tue Mar 13 02:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src15.csv
[Tue Mar 13 02:48:04 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Mar 13 02:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src15.csv
[Tue Mar 13 02:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Mar 13 02:48:05 2012] fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Mar 13 02:48:05 2012] Fit fullrun_mos1_xmm0110900101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Mar 13 02:48:25 2012] Warning, spatial fit 15 centroid is now closest to src. 24
[Tue Mar 13 02:48:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 02:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 02:48:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 02:48:25 2012] Source does appear to be extended
[Tue Mar 13 02:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:48:25 2012] Source is confused with source 37
[Tue Mar 13 02:49:00 2012] XMMSAS src. selection expression = ellipse(22445.492000, 26380.526000, 230.538007, 230.538007, 0.000000, X, Y)
[Tue Mar 13 02:49:00 2012] Not overwriting source region fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src.reg
[Tue Mar 13 02:49:00 2012] Extracting stamp from image fullrun_mos1_xmm0110900101_pi300-10000_cl_sm2.00.img.gz, (245, 291) - (272, 317)
[Tue Mar 13 02:49:00 2012] XMMSAS bgd. selection expression = annulus(22445.492000, 26380.526000, 384.230011, 768.460022, X, Y) && !ellipse(22546.640600, 26915.042200, 399.313611, 399.313611, 0.000000, X, Y) && !ellipse(22590.836000, 25518.454000, 2468.736071, 2468.736071, 0.000000, X, Y) && !ellipse(23272.078000, 25000.696000, 1234.664036, 1234.664036, 0.000000, X, Y)
[Tue Mar 13 02:49:00 2012] Writing fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25.gif
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0110900101/products/events/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Mean detx,y = (-3088.65, -4446.35) 
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src.img and ../../xmm0110900101/products/images/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0110900101/products/spectra/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Tue Mar 13 02:49:02 2012] Setting source spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Mar 13 02:49:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Mar 13 02:49:02 2012] ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0110900101/products/lightcurves/fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue Mar 13 02:49:12 2012] Not generating rmf since there are only 75 counts
[Tue Mar 13 02:49:12 2012] rmf not generated due to insufficient counts
[Tue Mar 13 02:49:12 2012] fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Tue Mar 13 02:50:13 2012] Updating aperture counts using extracted products
[Tue Mar 13 02:50:13 2012] Error reading totcts from fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Mar 13 02:50:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 02:50:15 2012] Using photon index=1.80, rate=0.00277, arf fullrun_mos1_xmm0110900101_pi300-10000_pass1_cl_src25.arf
[Tue Mar 13 02:50:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 02:50:15 2012] Updating source flux to 5.3e-14
[Tue Mar 13 02:50:24 2012] Flag c found in src. 25 procflags, skipping spectral fitting
[Tue Mar 13 02:50:24 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting