[Sun Nov 27 08:21:29 2011] Detection parameters:
  Position = (364.1, 384.8) = 0 56 52.96 -22 15 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.3 +/- 16.3
  Background counts = 5.5
  Rate = 0.02 +/- 0.002

[Sun Nov 27 08:21:30 2011] Off-axis axis estimate = 7.86'
[Sun Nov 27 09:45:01 2011] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:45:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 09:45:01 2011] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Nov 27 09:45:01 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Sun Nov 27 09:45:01 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.36"
[Sun Nov 27 10:31:27 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_src2.ximg exists
[Sun Nov 27 10:31:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_src2.csv
[Sun Nov 27 10:31:27 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Nov 27 10:31:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_src2.csv
[Sun Nov 27 10:31:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 10:31:27 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Nov 27 10:31:27 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Nov 27 10:31:27 2011] Fit fullrun_mos2_xmm0110890701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Nov 27 10:31:43 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.590814 pixels away
[Sun Nov 27 10:31:43 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 10:31:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 10:31:43 2011] Assessing source extent using major
[Sun Nov 27 10:31:43 2011] Source does appear to be extended
[Sun Nov 27 10:31:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 11:42:43 2011] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 11:42:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 11:42:43 2011] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Nov 27 11:42:43 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Sun Nov 27 11:42:43 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.36"
[Sun Nov 27 12:12:05 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_src2.ximg exists
[Sun Nov 27 12:12:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_src2.csv
[Sun Nov 27 12:12:05 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Nov 27 12:12:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_src2.csv
[Sun Nov 27 12:12:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 12:12:05 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Nov 27 12:12:05 2011] fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Nov 27 12:12:05 2011] Fit fullrun_mos2_xmm0110890701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Nov 27 12:12:17 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.590814 pixels away
[Sun Nov 27 12:12:17 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 12:12:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 12:12:17 2011] Assessing source extent using major
[Sun Nov 27 12:12:17 2011] Source does appear to be extended
[Sun Nov 27 12:12:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 13:42:33 2011] XMMSAS src. selection expression = ellipse(31626.737610, 33424.880096, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Nov 27 13:42:33 2011] Writing source region out to fullrun_mos2_xmm0110890701_pi300-10000_pass1_cl_src3_src.reg
[Sun Nov 27 13:42:33 2011] Extracting stamp from image fullrun_mos2_xmm0110890701_pi300-10000_cl_sm2.00.img.gz, (327, 347) - (402, 422)
[Sun Nov 27 13:42:33 2011] XMMSAS bgd. selection expression = annulus(31626.737610, 33424.880096, 1087.500000, 2175.000000, X, Y) && !ellipse(30416.538086, 35893.831665, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Nov 27 13:42:33 2011] Writing fullrun_mos2_xmm0110890701_pi300-10000_pass1_cl_src3.gif
[Sun Nov 27 13:47:29 2011] Mean detx,y = (3386.23, -10789.74) 
[Sun Nov 27 13:47:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 13:47:47 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 13:47:47 2011] Setting source spectrum file to fullrun_mos2_xmm0110890701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Nov 27 13:47:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110890701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Nov 27 13:56:59 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Nov 27 13:56:59 2011] rmf not generated due to insufficient counts
[Sun Nov 27 14:14:56 2011] Updating aperture counts using extracted products
[Sun Nov 27 14:14:56 2011] Error reading totcts from fullrun_mos2_xmm0110890701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Nov 27 14:14:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 14:14:57 2011] Using photon index=1.80, rate=0.018, arf fullrun_mos2_xmm0110890701_pi300-10000_pass1_cl_src3.arf
[Sun Nov 27 14:14:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 14:14:57 2011] Updating source flux to 3.2e-13
[Sun Nov 27 14:15:37 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting