[Thu Jun  7 06:14:51 2012] Detection parameters:
  Position = (300.7, 278.1) = 0 57 25.87 -22 25 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 478.6 +/- 29.7
  Background counts = 38.6
  Rate = 0.02 +/- 0.002

[Thu Jun  7 06:14:51 2012] Off-axis axis estimate = 1.48'
[Thu Jun  7 06:21:43 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 06:21:43 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Thu Jun  7 06:21:43 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Thu Jun  7 06:21:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.17"
[Thu Jun  7 23:10:46 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 23:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 23:10:46 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 23:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 23:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 23:10:46 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 23:10:46 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 23:10:46 2012] Fit fullrun_pn_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  8 01:28:54 2012] Spatial fit model total counts = 1558.710000, observed total counts = 1552.000000
[Fri Jun  8 01:28:54 2012] Offset between fit and detection position for source 1 = 0.029436 pixels
[Fri Jun  8 01:28:54 2012] 1594.693000 total counts/ 1262.190000 bgd. counts: snr = 9.359081
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.029436 pixels
  Position = (300.7, 278.1) = 0 57 25.88 -22 25 14.5
  Extent = 7.2 (6.2-8.6)", rotation angle = 0
  Source counts = 332.5 +/- 39.9
  Background counts = 1262.2
  Rate = 0.01 +/- 0.001
[Fri Jun  8 01:28:54 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:28:54 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:28:54 2012] Source does appear to be extended
[Fri Jun  8 01:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 01:29:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:29:11 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Fri Jun  8 01:29:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Fri Jun  8 01:29:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.20"
[Fri Jun  8 01:35:24 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  8 01:35:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 01:35:24 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  8 01:35:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 01:35:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:35:24 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  8 01:35:24 2012] fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  8 01:35:24 2012] Fit fullrun_pn_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  8 03:10:47 2012] Spatial fit model total counts = 1555.720000, observed total counts = 1552.000000
[Fri Jun  8 03:10:47 2012] Offset between fit and detection position for source 1 = 0.034389 pixels
[Fri Jun  8 03:10:47 2012] 1591.221000 total counts/ 1254.450000 bgd. counts: snr = 9.508412
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.034389 pixels
  Position = (300.7, 278.2) = 0 57 25.89 -22 25 14.4
  Extent = 7.2 (6.3-8.6)", rotation angle = 0
  Source counts = 336.8 +/- 39.9
  Background counts = 1254.5
  Rate = 0.01 +/- 0.001
[Fri Jun  8 03:10:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:10:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:10:47 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:10:47 2012] Source does appear to be extended
[Fri Jun  8 03:10:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:11:00 2012] XMMSAS src. selection expression = ellipse(26113.687800, 24151.885200, 429.463812, 429.463812, 0.000000, X, Y)
[Fri Jun  8 03:11:00 2012] Writing source region out to fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  8 03:11:00 2012] Extracting stamp from image fullrun_pn_xmm0110890401_pi300-10000_cl_sm2.00.img.gz, (276, 253) - (325, 303)
[Fri Jun  8 03:11:00 2012] XMMSAS bgd. selection expression = annulus(26113.687800, 24151.885200, 715.773021, 1431.546041, X, Y) && !ellipse(27720.858560, 26888.282400, 1484.452136, 1484.452136, 0.000000, X, Y) && !ellipse(25698.939420, 23282.107000, 723.871221, 723.871221, 0.000000, X, Y)
[Fri Jun  8 03:11:00 2012] Writing fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1.gif
[Fri Jun  8 03:15:11 2012] Mean detx,y = (-5.26, 2920.30) 
[Fri Jun  8 03:15:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:15:29 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:15:29 2012] Setting source spectrum file to fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 03:15:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 04:53:56 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:53:56 2012] Error reading totcts from fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 04:53:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:53:56 2012] Using photon index=1.80, rate=0.0115, arf fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 04:53:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:53:56 2012] Updating source flux to 3.7e-14
[Fri Jun  8 04:55:46 2012] Reading fit data from xmm0110890401/analysis//spectral/fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 04:55:46 2012] Spectral fit parameter nH value = 1.8863e+21
[Fri Jun  8 04:55:46 2012] Spectral fit parameter PhoIndex value = 4.73692
[Fri Jun  8 04:55:46 2012] Failed to get F(0.3-8.0) from xmm0110890401/analysis//spectral/fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 04:55:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:55:46 2012] Using Nh = 1.9e+21, photon index=4.74, rate=0.0115, arf fullrun_pn_xmm0110890401_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 04:55:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:55:46 2012] Updating source flux to 2e-14