[Thu Jun  7 06:15:32 2012] Detection parameters:
  Position = (374.9, 193.4) = 0 57 2.60 -22 31 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.8 +/- 12.6
  Background counts = 6.9
  Rate = 0.006 +/- 0.0007

[Thu Jun  7 06:15:32 2012] Off-axis axis estimate = 9.42'
[Thu Jun  7 23:53:37 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 23:53:37 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Thu Jun  7 23:53:37 2012] source mask rpix=2.6, npix_max = 37, mask sum = 32, frac = 0.854
[Thu Jun  7 23:53:37 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.14"
[Fri Jun  8 01:28:51 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  8 01:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src7.csv
[Fri Jun  8 01:28:51 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  8 01:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src7.csv
[Fri Jun  8 01:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:28:52 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  8 01:28:52 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  8 01:28:52 2012] Fit fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun  8 01:29:04 2012] Spatial fit model total counts = 154.925000, observed total counts = 146.000000
[Fri Jun  8 01:29:04 2012] Offset between fit and detection position for source 22 = 0.402746 pixels
[Fri Jun  8 01:29:04 2012] 155.825400 total counts/ 72.191600 bgd. counts: snr = 9.843250
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.402746 pixels
  Position = (374.6, 193.7) = 0 57 2.69 -22 31 21.9
  Extent = 6.1 (4.7-7.6)", rotation angle = 0
  Source counts = 83.6 +/- 12.5
  Background counts = 72.2
  Rate = 0.003 +/- 0.0004
[Fri Jun  8 01:29:04 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:29:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:29:04 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:29:04 2012] Source does appear to be extended
[Fri Jun  8 01:29:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 02:30:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:30:25 2012] Initial guess for spatial extent in simple fitting = 6.12"
[Fri Jun  8 02:30:25 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.099
[Fri Jun  8 02:30:25 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.12"
[Fri Jun  8 03:10:45 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  8 03:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src7.csv
[Fri Jun  8 03:10:45 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  8 03:10:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src7.csv
[Fri Jun  8 03:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:10:46 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  8 03:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun  8 03:10:46 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  8 03:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun  8 03:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:10:54 2012] Warning, spatial fit 7 centroid is now closest to src. 17
[Fri Jun  8 03:10:54 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:10:54 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:10:54 2012] Source does appear to be extended
[Fri Jun  8 03:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:20:42 2012] XMMSAS src. selection expression = ellipse(32542.703200, 16800.227000, 367.372211, 367.372211, 0.000000, X, Y)
[Fri Jun  8 04:20:42 2012] Writing source region out to fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src22_src.reg
[Fri Jun  8 04:20:42 2012] Extracting stamp from image fullrun_mos2_xmm0110890401_pi300-10000_cl_sm2.00.img.gz, (353, 173) - (396, 215)
[Fri Jun  8 04:20:42 2012] XMMSAS bgd. selection expression = annulus(32542.703200, 16800.227000, 612.287018, 1224.574035, X, Y)
[Fri Jun  8 04:20:42 2012] Writing fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src22.gif
[Fri Jun  8 04:24:25 2012] Mean detx,y = (-9088.17, -6242.48) 
[Fri Jun  8 04:24:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 04:24:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 04:24:41 2012] Setting source spectrum file to fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun  8 04:24:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jun  8 04:41:57 2012] Not generating rmf since there are only 83 counts
[Fri Jun  8 04:41:57 2012] rmf not generated due to insufficient counts
[Fri Jun  8 04:53:57 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:53:57 2012] Error reading totcts from fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun  8 04:53:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:53:57 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src22.arf
[Fri Jun  8 04:53:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:53:57 2012] Updating source flux to 5.9e-14
[Fri Jun  8 04:54:36 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting