[Thu Jun  7 06:15:32 2012] Detection parameters:
  Position = (319.3, 309.8) = 0 57 20.06 -22 22 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89587.8 +/- 352.8
  Background counts = 6.8
  Rate = 3 +/- 0.01

[Thu Jun  7 06:15:32 2012] Off-axis axis estimate = 1.72'
[Thu Jun  7 23:53:37 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 23:53:37 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jun  7 23:53:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Jun  7 23:53:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun  8 01:28:51 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  8 01:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 01:28:51 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  8 01:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 01:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:28:51 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  8 01:28:51 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  8 01:28:51 2012] Fit fullrun_mos2_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  8 01:29:04 2012] Spatial fit model total counts = 79659.800000, observed total counts = 77939.000000
[Fri Jun  8 01:29:04 2012] Offset between fit and detection position for source 2 = 0.249242 pixels
[Fri Jun  8 01:29:04 2012] 79506.200000 total counts/ 18352.200000 bgd. counts: snr = 451.420006
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.249242 pixels
  Position = (319.1, 309.6) = 0 57 20.11 -22 22 57.7
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 61154.0 +/- 282.0
  Background counts = 18352.2
  Rate = 2 +/- 0.009
[Fri Jun  8 01:29:04 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:29:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:29:04 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:29:04 2012] Source does appear to be extended
[Fri Jun  8 01:29:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 02:30:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:30:25 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Fri Jun  8 02:30:25 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.028
[Fri Jun  8 02:30:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Fri Jun  8 03:10:45 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  8 03:10:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 03:10:45 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  8 03:10:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 03:10:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 03:10:46 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  8 03:10:46 2012] fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  8 03:10:46 2012] Fit fullrun_mos2_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  8 03:10:54 2012] Spatial fit model total counts = 79817.500000, observed total counts = 78099.000000
[Fri Jun  8 03:10:54 2012] Offset between fit and detection position for source 2 = 0.013061 pixels
[Fri Jun  8 03:10:54 2012] 80102.100000 total counts/ 18574.800000 bgd. counts: snr = 451.445974
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.013061 pixels
  Position = (319.1, 309.6) = 0 57 20.12 -22 22 57.7
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 61527.3 +/- 283.0
  Background counts = 18574.8
  Rate = 2 +/- 0.01
[Fri Jun  8 03:10:54 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:10:54 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:10:54 2012] Source does appear to be extended
[Fri Jun  8 03:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 04:20:42 2012] Counts = 61527.300000, rescaling region sizes by 3.000000
[Fri Jun  8 04:20:42 2012] XMMSAS src. selection expression = ellipse(27714.323860, 26884.983800, 951.840027, 951.840027, 0.000000, X, Y)
[Fri Jun  8 04:20:42 2012] Writing source region out to fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  8 04:20:42 2012] Extracting stamp from image fullrun_mos2_xmm0110890401_pi300-10000_cl_sm2.00.img.gz, (264, 255) - (374, 364)
[Fri Jun  8 04:20:42 2012] XMMSAS bgd. selection expression = annulus(27714.323860, 26884.983800, 4759.200137, 9518.400274, X, Y) && !ellipse(20158.430161, 22930.167908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19683.780020, 31819.589200, 672.592019, 417.352812, 347.673327, X, Y) && !ellipse(34945.560400, 17665.862400, 347.496810, 347.496810, 0.000000, X, Y) && !ellipse(28832.483887, 26876.098999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35226.301820, 35410.352000, 427.024012, 427.024012, 0.000000, X, Y) && !ellipse(28225.984924, 25825.323364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.396240, 26236.130737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35353.602234, 25948.713196, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  8 04:20:42 2012] Writing fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2.gif
[Fri Jun  8 04:20:50 2012] Mean detx,y = (117.96, 102.93) 
[Fri Jun  8 04:20:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 04:23:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 04:23:08 2012] Setting source spectrum file to fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  8 04:23:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  8 04:53:57 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:53:57 2012] Error reading totcts from fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  8 04:53:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:53:57 2012] Using photon index=1.80, rate=2.07, arf fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2.arf
[Fri Jun  8 04:53:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:53:57 2012] Updating source flux to 2.2e-11
[Fri Jun  8 04:55:20 2012] Reading fit data from xmm0110890401/analysis//spectral/fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  8 04:55:20 2012] Spectral fit parameter nH value = 2.40644e+13
[Fri Jun  8 04:55:20 2012] Spectral fit parameter PhoIndex value = 2.77313
[Fri Jun  8 04:55:20 2012] Failed to get F(0.3-8.0) from xmm0110890401/analysis//spectral/fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 04:55:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:55:20 2012] Using Nh = 2.4e+13, photon index=2.77, rate=2.07, arf fullrun_mos2_xmm0110890401_pi300-10000_pass1_cl_src2.arf
[Fri Jun  8 04:55:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:55:20 2012] Updating source flux to 1.7e-11