[Thu Jun  7 06:15:13 2012] Detection parameters:
  Position = (391.5, 435.9) = 0 56 57.46 -22 13 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.8 +/- 15.1
  Background counts = 7.3
  Rate = 0.005 +/- 0.0005

[Thu Jun  7 06:15:13 2012] Off-axis axis estimate = 12.03'
[Thu Jun  7 23:10:46 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 23:10:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 23:10:46 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Thu Jun  7 23:10:46 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Thu Jun  7 23:10:46 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.45"
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun  7 23:53:36 2012] Fit fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun  7 23:53:36 2012] Fit fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun  8 01:28:59 2012] Spatial fit model total counts = 268.405000, observed total counts = 268.000000
[Fri Jun  8 01:28:59 2012] Offset between fit and detection position for source 6 = 0.137596 pixels
[Fri Jun  8 01:28:59 2012] 270.578000 total counts/ 168.892000 bgd. counts: snr = 7.824501
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.137596 pixels
  Position = (391.5, 435.8) = 0 56 57.44 -22 13 48.6
  Extent = 6.6 (5.4-8.0)", rotation angle = 0
  Source counts = 101.7 +/- 16.4
  Background counts = 168.9
  Rate = 0.003 +/- 0.0006
[Fri Jun  8 01:28:59 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:28:59 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:28:59 2012] Source does appear to be extended
[Fri Jun  8 01:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 01:35:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:35:24 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Fri Jun  8 01:35:24 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Fri Jun  8 01:35:24 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.58"
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun  8 02:30:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src9.csv
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun  8 02:30:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src9.csv
[Fri Jun  8 02:30:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun  8 02:30:24 2012] Fit fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun  8 03:10:52 2012] Spatial fit model total counts = 232.996000, observed total counts = 234.000000
[Fri Jun  8 03:10:52 2012] Offset between fit and detection position for source 6 = 0.016885 pixels
[Fri Jun  8 03:10:52 2012] 235.059000 total counts/ 131.691000 bgd. counts: snr = 9.007579
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.016885 pixels
  Position = (391.5, 435.8) = 0 56 57.44 -22 13 48.5
  Extent = 6.8 (5.2-8.0)", rotation angle = 0
  Source counts = 103.4 +/- 15.3
  Background counts = 131.7
  Rate = 0.004 +/- 0.0005
[Fri Jun  8 03:10:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:10:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:10:52 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:10:52 2012] Source does appear to be extended
[Fri Jun  8 03:10:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:53:06 2012] XMMSAS src. selection expression = ellipse(34013.385400, 37865.797400, 405.177612, 405.177612, 0.000000, X, Y)
[Fri Jun  8 03:53:06 2012] Writing source region out to fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun  8 03:53:06 2012] Extracting stamp from image fullrun_mos1_xmm0110890401_pi300-10000_cl_sm2.00.img.gz, (368, 413) - (415, 459)
[Fri Jun  8 03:53:06 2012] XMMSAS bgd. selection expression = annulus(34013.385400, 37865.797400, 675.296019, 1350.592039, X, Y) && !ellipse(33289.940887, 38686.043671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34758.193329, 37462.707062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35796.852000, 36449.146000, 2005.104058, 2005.104058, 0.000000, X, Y)
[Fri Jun  8 03:53:06 2012] Writing fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src6.gif
[Fri Jun  8 03:55:06 2012] Mean detx,y = (12991.64, -197.96) 
[Fri Jun  8 03:55:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:55:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:55:14 2012] Setting source spectrum file to fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun  8 03:55:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun  8 04:53:56 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:53:56 2012] Error reading totcts from fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun  8 04:53:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:53:56 2012] Using photon index=1.80, rate=0.00355, arf fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src6.arf
[Fri Jun  8 04:53:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:53:56 2012] Updating source flux to 8.5e-14