[Thu Jun  7 06:15:13 2012] Detection parameters:
  Position = (405.0, 407.8) = 0 56 53.20 -22 15 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.8 +/- 16.0
  Background counts = 7.3
  Rate = 0.01 +/- 0.001

[Thu Jun  7 06:15:13 2012] Off-axis axis estimate = 11.07'
[Thu Jun  7 23:10:46 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 23:10:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 23:10:46 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Thu Jun  7 23:10:46 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Thu Jun  7 23:10:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.96"
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun  7 23:53:36 2012] Fit fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun  7 23:53:36 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun  7 23:53:36 2012] Fit fullrun_mos1_xmm0110890401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun  8 01:28:59 2012] Spatial fit model total counts = 244.810000, observed total counts = 243.000000
[Fri Jun  8 01:28:59 2012] Offset between fit and detection position for source 10 = 0.310182 pixels
[Fri Jun  8 01:28:59 2012] 242.425000 total counts/ 97.080000 bgd. counts: snr = 14.751467
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.310182 pixels
  Position = (404.8, 407.6) = 0 56 53.27 -22 15 51.2
  Extent = 11.0" x 5.4", rotation angle = 217
  Source counts = 145.3 +/- 15.6
  Background counts = 97.1
  Rate = 0.005 +/- 0.0005
[Fri Jun  8 01:28:59 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:28:59 2012] Assessing source extent using major
[Fri Jun  8 01:28:59 2012] Source does appear to be extended
[Fri Jun  8 01:28:59 2012] Computing asymmetry using major and minor axis, asym = 2.03
[Fri Jun  8 01:28:59 2012] Source is asymmetric
[Fri Jun  8 01:28:59 2012] Source is confused with source 26
[Fri Jun  8 01:35:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:35:24 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Fri Jun  8 01:35:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Fri Jun  8 01:35:24 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.18"
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  8 02:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src3.csv
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  8 02:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src3.csv
[Fri Jun  8 02:30:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  8 02:30:24 2012] fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  8 02:30:24 2012] Fit fullrun_mos1_xmm0110890401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun  8 03:10:52 2012] Spatial fit model total counts = 239.395000, observed total counts = 238.000000
[Fri Jun  8 03:10:52 2012] Offset between fit and detection position for source 10 = 0.488608 pixels
[Fri Jun  8 03:10:52 2012] 214.704500 total counts/ 68.531500 bgd. counts: snr = 17.657208
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.488608 pixels
  Position = (405.3, 407.4) = 0 56 53.13 -22 15 51.9
  Extent = 8.1 (6.6-9.6)", rotation angle = 0
  Source counts = 146.2 +/- 14.7
  Background counts = 68.5
  Rate = 0.005 +/- 0.0005
[Fri Jun  8 03:10:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 03:10:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 03:10:52 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 03:10:52 2012] Source does appear to be extended
[Fri Jun  8 03:10:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:53:05 2012] XMMSAS src. selection expression = ellipse(35208.728000, 35396.407400, 488.457014, 488.457014, 0.000000, X, Y)
[Fri Jun  8 03:53:05 2012] Writing source region out to fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun  8 03:53:05 2012] Extracting stamp from image fullrun_mos1_xmm0110890401_pi300-10000_cl_sm2.00.img.gz, (377, 379) - (433, 435)
[Fri Jun  8 03:53:05 2012] XMMSAS bgd. selection expression = annulus(35208.728000, 35396.407400, 814.095023, 1628.190047, X, Y) && !ellipse(34758.193329, 37462.707062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35796.852000, 36449.146000, 2005.104058, 2005.104058, 0.000000, X, Y)
[Fri Jun  8 03:53:05 2012] Writing fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src10.gif
[Fri Jun  8 03:53:35 2012] Mean detx,y = (11411.99, 2039.50) 
[Fri Jun  8 03:53:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:53:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:53:42 2012] Setting source spectrum file to fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  8 03:53:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun  8 04:53:56 2012] Updating aperture counts using extracted products
[Fri Jun  8 04:53:56 2012] Error reading totcts from fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  8 04:53:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 04:53:56 2012] Using photon index=1.80, rate=0.00502, arf fullrun_mos1_xmm0110890401_pi300-10000_pass1_cl_src10.arf
[Fri Jun  8 04:53:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 04:53:56 2012] Updating source flux to 9.9e-14
[Fri Jun  8 04:53:58 2012] Flag c found in src. 10 procflags, skipping spectral fitting