[Wed May 22 07:12:43 2013] Detection parameters:
  Position = (197.8, 361.3) = 0 53 59.65 12 47 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.2 +/- 13.4
  Background counts = 22.1
  Rate = 0.006 +/- 0.0007

[Wed May 22 07:12:43 2013] Off-axis axis estimate = 8.60'
[Wed May 22 07:15:56 2013] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Wed May 22 07:15:56 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Wed May 22 07:15:56 2013] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.511
[Wed May 22 07:15:56 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.73"
[Wed May 22 07:50:00 2013] fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 22 07:50:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_src3.csv
[Wed May 22 07:50:00 2013] fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 22 07:50:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_src3.csv
[Wed May 22 07:50:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 07:50:00 2013] fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 22 07:50:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 07:50:00 2013] fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 22 07:50:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 07:50:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 09:03:33 2013] Spatial fit model total counts = 377.013000, observed total counts = 257.000000
[Wed May 22 09:03:33 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 09:03:34 2013] Vigneting correction estimate = 1.000000
[Wed May 22 09:03:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 09:03:34 2013] Assessing source extent using major
[Wed May 22 09:03:34 2013] Source does appear to be extended
[Wed May 22 09:03:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:03:34 2013] Deleting source due to low Poisson probability 0.9