[Wed May 22 07:13:30 2013] Detection parameters:
  Position = (394.9, 338.3) = 0 53 1.02 12 45 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.7 +/- 6.2
  Background counts = 5.4
  Rate = 0.001 +/- 0.0003

[Wed May 22 07:13:30 2013] Off-axis axis estimate = 7.57'
[Wed May 22 08:19:17 2013] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Wed May 22 08:19:17 2013] Initial guess for spatial extent in simple fitting = 10.21"
[Wed May 22 08:19:17 2013] source mask rpix=2.3, npix_max = 32, mask sum = 22, frac = 0.678
[Wed May 22 08:19:17 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.21"
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src15.csv
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src15.csv
[Wed May 22 09:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 22 09:03:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 22 09:03:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 09:03:42 2013] Spatial fit model total counts = 87.732700, observed total counts = 76.000000
[Wed May 22 09:03:42 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 09:03:42 2013] Vigneting correction estimate = 1.000000
[Wed May 22 09:03:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 09:03:42 2013] Assessing source extent using major
[Wed May 22 09:03:42 2013] Source does appear to be extended
[Wed May 22 09:03:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:03:42 2013] Deleting source due to low Poisson probability 0.7