[Wed May 22 07:13:30 2013] Detection parameters:
  Position = (274.6, 292.6) = 0 53 36.81 12 42 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 15.5
  Background counts = 6.6
  Rate = 0.006 +/- 0.001

[Wed May 22 07:13:30 2013] Off-axis axis estimate = 1.78'
[Wed May 22 08:19:17 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed May 22 08:19:17 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Wed May 22 08:19:17 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Wed May 22 08:19:17 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.32"
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src5.csv
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src5.csv
[Wed May 22 09:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 22 09:03:28 2013] fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 22 09:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed May 22 09:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110890301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 09:03:42 2013] Source 5 is offset by -6.166120 and 6.349081 pixels which is larger than
2 X fitted extent = 1.929435 x 6.730391, not incorporating fit results
[Wed May 22 09:03:42 2013] Vigneting correction estimate = 1.000000
[Wed May 22 09:03:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 09:03:42 2013] Assessing source extent using major
[Wed May 22 09:03:42 2013] Source does appear to be extended
[Wed May 22 09:03:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:03:42 2013] Deleting source due to low Poisson probability 1.0