[Wed May 22 09:27:06 2013] Detection parameters: Position = (268.9, 230.1) = 13 25 29.15 -38 28 9.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 120.1 +/- 19.4 Background counts = 132.1 Rate = 0.003 +/- 0.0004 [Wed May 22 09:27:06 2013] Off-axis axis estimate = 5.40' [Wed May 22 09:31:44 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting [Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 9.13" [Wed May 22 09:31:44 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.111 [Wed May 22 09:31:44 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 9.13" [Wed May 22 14:50:11 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src60.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src60.csv [Wed May 22 14:50:11 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src60_1.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src60.csv [Wed May 22 14:50:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src60.csv [Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src60.csv [Wed May 22 14:50:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 16:05:35 2013] Warning, spatial fit 60 centroid is now closest to src. 22 [Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000 [Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 16:05:35 2013] Assessing source extent using major [Wed May 22 16:05:35 2013] Source does appear to be extended [Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 16:05:35 2013] Source is confused with source 22 [Wed May 22 16:05:55 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting [Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 9.13" [Wed May 22 16:05:55 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.111 [Wed May 22 16:05:55 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 9.13" [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src59.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src59.csv [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src59_1.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src59.csv [Wed May 22 18:20:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 18:20:37 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists [Wed May 22 18:20:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src59.csv [Wed May 22 18:20:37 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists [Wed May 22 18:20:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src59.csv [Wed May 22 18:20:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 19:06:15 2013] Source 61 is offset by 6.871338 and 3.915023 pixels which is larger than 2 X fitted extent = 2.216924 x 8.393150, not incorporating fit results [Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000 [Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 19:06:15 2013] Assessing source extent using major [Wed May 22 19:06:15 2013] Source does appear to be extended [Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 19:06:33 2013] XMMSAS src. selection expression = ellipse(23344.830383, 19969.939011, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 22 19:06:33 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61_src.reg [Wed May 22 19:06:33 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (231, 193) - (306, 268) [Wed May 22 19:06:33 2013] XMMSAS bgd. selection expression = annulus(23344.830383, 19969.939011, 1087.500000, 2175.000000, X, Y) && !ellipse(21457.352798, 22936.601044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.163800, 19666.821600, 404.397612, 326.030409, 359.887000, X, Y) && !ellipse(25865.709015, 22646.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.438080, 19228.010400, 365.948011, 365.948011, 0.000000, X, Y) && !ellipse(21512.110123, 17025.693390, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 22 19:06:33 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61.gif [Wed May 22 20:24:14 2013] Mean detx,y = (3811.64, -3012.29) [Wed May 22 20:24:19 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 20:24:44 2013] Binned source spectrum to 10 counts/bin [Wed May 22 20:24:45 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61_src_b10.pi.gz [Wed May 22 20:24:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61_bgd.pi.gz [Wed May 22 21:41:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 22 21:41:40 2013] rmf not generated due to insufficient counts [Wed May 22 22:21:28 2013] Updating aperture counts using extracted products [Wed May 22 22:21:28 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 873.00 [Wed May 22 22:21:28 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 5213.00 [Wed May 22 22:21:28 2013] Got source and background scale factors 1107519.000000, 9662474.000000 [Wed May 22 22:21:28 2013] User source parameters: Position = (268.9, 230.1) = 13 25 29.15 -38 28 9.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 275.5 +/- 30.6 Background aperture counts = 597.5 Rate = 0.005 +/- 0.0005 [Wed May 22 22:21:28 2013] Updating counts from extracted products [Wed May 22 22:21:28 2013] Set source signif. to 275.48/24.44 = 11.27 [Wed May 22 22:21:31 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 22:21:31 2013] Using photon index=1.80, rate=0.0048, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61.arf [Wed May 22 22:21:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 22:21:31 2013] Updating source flux to 1.9e-14 [Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete