[Wed May 22 09:27:04 2013] Detection parameters: Position = (247.2, 264.2) = 13 25 37.18 -38 25 42.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1246.4 +/- 47.1 Background counts = 146.7 Rate = 0.03 +/- 0.001 [Wed May 22 09:27:06 2013] Off-axis axis estimate = 4.47' [Wed May 22 09:31:44 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting [Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 8.66" [Wed May 22 09:31:44 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007 [Wed May 22 09:31:44 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.66" [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src5.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src5.csv [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src5.csv [Wed May 22 14:50:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 14:50:11 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 22 14:50:11 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 22 14:50:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 16:05:35 2013] Source 6 is offset by 5.839067 and 7.050081 pixels which is larger than 2 X fitted extent = 1.025508 x 1.025508, not incorporating fit results [Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000 [Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 16:05:35 2013] Assessing source extent using major [Wed May 22 16:05:35 2013] Source does appear to be extended [Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 16:05:55 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting [Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 8.66" [Wed May 22 16:05:55 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007 [Wed May 22 16:05:55 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.66" [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src5.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src5.csv [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src5_1.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src5.csv [Wed May 22 18:20:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 22 18:20:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 19:06:15 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.977989 pixels away [Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000 [Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 19:06:15 2013] Assessing source extent using major [Wed May 22 19:06:15 2013] Source does appear to be extended [Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 19:06:31 2013] Counts = 1246.381714, rescaling region sizes by 2.000000 [Wed May 22 19:06:31 2013] XMMSAS src. selection expression = ellipse(21457.352798, 22936.601044, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed May 22 19:06:31 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6_src.reg [Wed May 22 19:06:31 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (172, 189) - (322, 339) [Wed May 22 19:06:31 2013] XMMSAS bgd. selection expression = annulus(21457.352798, 22936.601044, 4350.000000, 8700.000000, X, Y) && !ellipse(25600.484200, 23941.956600, 1445.508042, 1403.527240, 3.207554, X, Y) && !ellipse(23866.149140, 28347.196600, 762.547222, 578.259217, 73.153000, X, Y) && !ellipse(21245.700000, 34170.614000, 3360.656097, 532.323215, 67.413500, X, Y) && !ellipse(21600.595920, 33332.947600, 2036.952059, 467.697613, 67.551500, X, Y) && !ellipse(29690.592010, 32207.448273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12319.517227, 31187.699310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30344.523400, 22261.482200, 380.246411, 380.246411, 0.000000, X, Y) && !ellipse(12446.310806, 21613.687561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.163800, 19666.821600, 404.397612, 326.030409, 359.887000, X, Y) && !ellipse(22113.196600, 32149.038000, 1482.880043, 602.492017, 62.447000, X, Y) && !ellipse(16619.917297, 31814.660583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26988.674896, 31685.219940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.778046, 31713.665924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22320.782928, 31704.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17807.741562, 31460.925720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.309200, 30657.056000, 1863.168054, 426.497612, 64.368700, X, Y) && !ellipse(25526.335205, 30758.614716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23023.260000, 30016.700000, 1377.088040, 385.833611, 66.364400, X, Y) && !ellipse(23248.297040, 29516.204600, 1327.592038, 381.976011, 65.230000, X, Y) && !ellipse(23471.440765, 29002.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15101.200714, 28276.199493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.402740, 27305.956207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.773000, 27724.429200, 1185.352034, 362.981610, 67.804900, X, Y) && !ellipse(24171.966000, 27324.162000, 1153.400033, 401.195212, 66.119700, X, Y) && !ellipse(19572.088181, 26811.279114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24370.226600, 26857.312600, 1572.552045, 419.712012, 66.598600, X, Y) && !ellipse(25865.709015, 22646.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15125.796600, 21991.310800, 650.507219, 650.507219, 0.000000, X, Y) && !ellipse(30768.225922, 20810.391190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23344.830383, 19969.939011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29092.179320, 19377.184800, 622.200818, 395.032811, 0.924826, X, Y) && !ellipse(22240.438080, 19228.010400, 365.948011, 365.948011, 0.000000, X, Y) && !ellipse(13029.452148, 18662.237518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21512.110123, 17025.693390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17782.883800, 14640.225800, 577.301617, 245.091207, 21.403282, X, Y) [Wed May 22 19:06:31 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6.gif [Wed May 22 19:14:38 2013] Mean detx,y = (4201.37, 502.58) [Wed May 22 19:14:46 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 19:17:50 2013] Binned source spectrum to 10 counts/bin [Wed May 22 19:17:51 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Wed May 22 19:17:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6_bgd.pi.gz [Wed May 22 20:41:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 22 20:41:53 2013] rmf not generated due to insufficient counts [Wed May 22 22:21:17 2013] Updating aperture counts using extracted products [Wed May 22 22:21:17 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 4931.00 [Wed May 22 22:21:17 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 61699.00 [Wed May 22 22:21:17 2013] Got source and background scale factors 3985262.000000, 135481492.000000 [Wed May 22 22:21:17 2013] User source parameters: Position = (247.2, 264.2) = 13 25 37.18 -38 25 42.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 3116.1 +/- 71.2 Background aperture counts = 1814.9 Rate = 0.05 +/- 0.001 [Wed May 22 22:21:17 2013] Updating counts from extracted products [Wed May 22 22:21:17 2013] Set source signif. to 3116.09/42.60 = 73.14 [Wed May 22 22:21:30 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 22:21:30 2013] Using photon index=1.80, rate=0.0543, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6.arf [Wed May 22 22:21:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 22:21:30 2013] Updating source flux to 1.7e-13 [Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete