[Wed May 22 09:27:05 2013] Detection parameters: Position = (294.0, 354.1) = 13 25 19.86 -38 19 12.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 193.8 +/- 20.5 Background counts = 109.4 Rate = 0.005 +/- 0.0005 [Wed May 22 09:27:06 2013] Off-axis axis estimate = 4.05' [Wed May 22 09:31:44 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting [Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 8.45" [Wed May 22 09:31:44 2013] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.754 [Wed May 22 09:31:44 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 8.45" [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src41.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src41.csv [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src41_1.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src41.csv [Wed May 22 14:50:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src41.csv [Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src41.csv [Wed May 22 14:50:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 16:05:35 2013] Warning, spatial fit 41 centroid is now closest to src. 37 [Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000 [Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 16:05:35 2013] Assessing source extent using major [Wed May 22 16:05:35 2013] Source does appear to be extended [Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 16:05:55 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting [Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 8.45" [Wed May 22 16:05:55 2013] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.754 [Wed May 22 16:05:55 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 8.45" [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src40.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src40.csv [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src40_1.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src40.csv [Wed May 22 18:20:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 18:20:37 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Wed May 22 18:20:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src40.csv [Wed May 22 18:20:37 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Wed May 22 18:20:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src40.csv [Wed May 22 18:20:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 19:06:15 2013] Spatial fit model total counts = 962.452000, observed total counts = 836.000000 [Wed May 22 19:06:15 2013] Poor agreement between spatial fit and data for source 42 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000 [Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 19:06:15 2013] Assessing source extent using major [Wed May 22 19:06:15 2013] Source does appear to be extended [Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 19:06:32 2013] XMMSAS src. selection expression = ellipse(25526.335205, 30758.614716, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 22 19:06:32 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42_src.reg [Wed May 22 19:06:32 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (256, 317) - (331, 392) [Wed May 22 19:06:32 2013] XMMSAS bgd. selection expression = annulus(25526.335205, 30758.614716, 1087.500000, 2175.000000, X, Y) && !ellipse(23866.149140, 28347.196600, 762.547222, 578.259217, 73.153000, X, Y) && !ellipse(21245.700000, 34170.614000, 3360.656097, 532.323215, 67.413500, X, Y) && !ellipse(21600.595920, 33332.947600, 2036.952059, 467.697613, 67.551500, X, Y) && !ellipse(22113.196600, 32149.038000, 1482.880043, 602.492017, 62.447000, X, Y) && !ellipse(26988.674896, 31685.219940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.778046, 31713.665924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.309200, 30657.056000, 1863.168054, 426.497612, 64.368700, X, Y) && !ellipse(23023.260000, 30016.700000, 1377.088040, 385.833611, 66.364400, X, Y) && !ellipse(23248.297040, 29516.204600, 1327.592038, 381.976011, 65.230000, X, Y) && !ellipse(23471.440765, 29002.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.773000, 27724.429200, 1185.352034, 362.981610, 67.804900, X, Y) [Wed May 22 19:06:32 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42.gif [Wed May 22 20:05:08 2013] Mean detx,y = (-2690.86, 6055.72) [Wed May 22 20:05:12 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 20:05:35 2013] Binned source spectrum to 10 counts/bin [Wed May 22 20:05:35 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42_src_b10.pi.gz [Wed May 22 20:05:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42_bgd.pi.gz [Wed May 22 21:18:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 22 21:18:33 2013] rmf not generated due to insufficient counts [Wed May 22 22:21:24 2013] Updating aperture counts using extracted products [Wed May 22 22:21:24 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 626.00 [Wed May 22 22:21:24 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 2912.00 [Wed May 22 22:21:24 2013] Got source and background scale factors 1054428.000000, 6339765.000000 [Wed May 22 22:21:24 2013] User source parameters: Position = (294.0, 354.1) = 13 25 19.86 -38 19 12.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 141.7 +/- 26.0 Background aperture counts = 484.3 Rate = 0.002 +/- 0.0005 [Wed May 22 22:21:24 2013] Updating counts from extracted products [Wed May 22 22:21:24 2013] Set source signif. to 141.68/22.01 = 6.44 [Wed May 22 22:21:31 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 22:21:31 2013] Using photon index=1.80, rate=0.00247, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42.arf [Wed May 22 22:21:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 22:21:31 2013] Updating source flux to 1.3e-14 [Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete