[Wed May 22 09:27:05 2013] Detection parameters:
  Position = (290.9, 365.1) = 13 25 21.01 -38 18 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.3 +/- 18.0
  Background counts = 107.3
  Rate = 0.003 +/- 0.0005

[Wed May 22 09:27:06 2013] Off-axis axis estimate = 4.86'
[Wed May 22 09:31:44 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Wed May 22 09:31:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.932
[Wed May 22 09:31:44 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 8.86"
[Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src37.ximg exists
[Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src37.csv
[Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src37.csv
[Wed May 22 14:50:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Wed May 22 14:50:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:05:35 2013] Source 38 is offset by 9.012414 and -2.685725 pixels which is larger than
2 X fitted extent = 1.034005 x 1.034005, not incorporating fit results
[Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000
[Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 16:05:35 2013] Assessing source extent using major
[Wed May 22 16:05:35 2013] Source does appear to be extended
[Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 16:05:55 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Wed May 22 16:05:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.932
[Wed May 22 16:05:55 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 8.86"
[Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src36.ximg exists
[Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src36.csv
[Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src36.csv
[Wed May 22 18:20:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed May 22 18:20:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:06:15 2013] Spatial fit model total counts = 866.638000, observed total counts = 722.000000
[Wed May 22 19:06:15 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:06:15 2013] Assessing source extent using major
[Wed May 22 19:06:15 2013] Source does appear to be extended
[Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 19:06:32 2013] XMMSAS src. selection expression = ellipse(25256.778046, 31713.665924, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 19:06:32 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38_src.reg
[Wed May 22 19:06:32 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (253, 328) - (328, 403)
[Wed May 22 19:06:32 2013] XMMSAS bgd. selection expression = annulus(25256.778046, 31713.665924, 1087.500000, 2175.000000, X, Y) && !ellipse(21245.700000, 34170.614000, 3360.656097, 532.323215, 67.413500, X, Y) && !ellipse(21600.595920, 33332.947600, 2036.952059, 467.697613, 67.551500, X, Y) && !ellipse(22113.196600, 32149.038000, 1482.880043, 602.492017, 62.447000, X, Y) && !ellipse(26988.674896, 31685.219940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22320.782928, 31704.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22761.309200, 30657.056000, 1863.168054, 426.497612, 64.368700, X, Y) && !ellipse(25526.335205, 30758.614716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23023.260000, 30016.700000, 1377.088040, 385.833611, 66.364400, X, Y) && !ellipse(23248.297040, 29516.204600, 1327.592038, 381.976011, 65.230000, X, Y) && !ellipse(23471.440765, 29002.944733, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 19:06:32 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38.gif
[Wed May 22 20:00:19 2013] Mean detx,y = (-2791.25, 7044.80) 
[Wed May 22 20:00:23 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 20:00:43 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 20:00:43 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed May 22 20:00:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed May 22 21:14:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 21:14:43 2013] rmf not generated due to insufficient counts
[Wed May 22 22:21:23 2013] Updating aperture counts using extracted products
[Wed May 22 22:21:23 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 556.00
[Wed May 22 22:21:23 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 2798.00
[Wed May 22 22:21:23 2013] Got source and background scale factors 1131256.000000, 6291820.000000
[Wed May 22 22:21:23 2013] User source parameters:
  Position = (290.9, 365.1) = 13 25 21.01 -38 18 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 52.9 +/- 24.6
  Background aperture counts = 503.1
  Rate = 0.0009 +/- 0.0004

[Wed May 22 22:21:23 2013] Updating counts from extracted products
[Wed May 22 22:21:23 2013] Set source signif. to 52.93/22.43 = 2.36
[Wed May 22 22:21:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:21:31 2013] Using photon index=1.80, rate=0.000923, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38.arf
[Wed May 22 22:21:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:21:31 2013] Updating source flux to 4.4e-15
[Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete