[Wed May 22 09:27:05 2013] Detection parameters:
  Position = (191.6, 366.2) = 13 25 57.69 -38 18 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.0 +/- 16.1
  Background counts = 95.7
  Rate = 0.002 +/- 0.0003

[Wed May 22 09:27:06 2013] Off-axis axis estimate = 9.17'
[Wed May 22 09:31:44 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Wed May 22 09:31:44 2013] source mask rpix=2.5, npix_max = 36, mask sum = 28, frac = 0.761
[Wed May 22 09:31:44 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 11.02"
[Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src35.ximg exists
[Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src35.csv
[Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src35.csv
[Wed May 22 14:50:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May 22 14:50:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:05:35 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 11.964171 pixels away
[Wed May 22 16:05:35 2013] Source 36 is offset by -3.941180 and -6.431396 pixels which is larger than
2 X fitted extent = 1.209697 x 1.209697, not incorporating fit results
[Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000
[Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 16:05:35 2013] Assessing source extent using major
[Wed May 22 16:05:35 2013] Source does appear to be extended
[Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 16:05:55 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Wed May 22 16:05:55 2013] source mask rpix=2.5, npix_max = 36, mask sum = 28, frac = 0.761
[Wed May 22 16:05:55 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 11.02"
[Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src34.ximg exists
[Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src34.csv
[Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src34.csv
[Wed May 22 18:20:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed May 22 18:20:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:06:15 2013] Spatial fit model total counts = 877.479000, observed total counts = 715.000000
[Wed May 22 19:06:15 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 19:06:15 2013] Source 36 is offset by -3.895066 and -6.431625 pixels which is larger than
2 X fitted extent = 1.209356 x 1.209356, not incorporating fit results
[Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:06:15 2013] Assessing source extent using major
[Wed May 22 19:06:15 2013] Source does appear to be extended
[Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 19:06:32 2013] XMMSAS src. selection expression = ellipse(16619.917297, 31814.660583, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 19:06:32 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36_src.reg
[Wed May 22 19:06:32 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (154, 329) - (229, 404)
[Wed May 22 19:06:32 2013] XMMSAS bgd. selection expression = annulus(16619.917297, 31814.660583, 1087.500000, 2175.000000, X, Y) && !ellipse(21245.700000, 34170.614000, 3360.656097, 532.323215, 67.413500, X, Y) && !ellipse(20446.827000, 36073.491300, 2266.272065, 547.744816, 66.063000, X, Y) && !ellipse(16832.421860, 33835.010437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17807.741562, 31460.925720, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 19:06:32 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36.gif
[Wed May 22 19:58:38 2013] Mean detx,y = (5262.57, 10519.88) 
[Wed May 22 19:58:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 19:59:07 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 19:59:08 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed May 22 19:59:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed May 22 21:14:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 21:14:13 2013] rmf not generated due to insufficient counts
[Wed May 22 22:21:23 2013] Updating aperture counts using extracted products
[Wed May 22 22:21:23 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 497.00
[Wed May 22 22:21:23 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 2637.00
[Wed May 22 22:21:23 2013] Got source and background scale factors 954529.000000, 7095411.000000
[Wed May 22 22:21:23 2013] User source parameters:
  Position = (191.6, 366.2) = 13 25 57.69 -38 18 17.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 142.3 +/- 23.3
  Background aperture counts = 354.7
  Rate = 0.002 +/- 0.0004

[Wed May 22 22:21:23 2013] Updating counts from extracted products
[Wed May 22 22:21:23 2013] Set source signif. to 142.25/18.83 = 7.55
[Wed May 22 22:21:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:21:31 2013] Using photon index=1.80, rate=0.00248, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36.arf
[Wed May 22 22:21:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:21:31 2013] Updating source flux to 1.6e-14
[Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete