[Wed May 22 09:27:05 2013] Detection parameters: Position = (194.0, 389.5) = 13 25 56.78 -38 16 37.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 102.2 +/- 17.6 Background counts = 93.3 Rate = 0.002 +/- 0.0003 [Wed May 22 09:27:06 2013] Off-axis axis estimate = 10.04' [Wed May 22 09:31:44 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting [Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 11.45" [Wed May 22 09:31:44 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070 [Wed May 22 09:31:44 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 11.45" [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src30.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src30.csv [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src30_1.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src30.csv [Wed May 22 14:50:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src30.csv [Wed May 22 14:50:12 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Wed May 22 14:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src30.csv [Wed May 22 14:50:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 16:05:35 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 11.712492 pixels away [Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000 [Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 16:05:35 2013] Assessing source extent using major [Wed May 22 16:05:35 2013] Source does appear to be extended [Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 16:05:55 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting [Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 11.45" [Wed May 22 16:05:55 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070 [Wed May 22 16:05:55 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 11.45" [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src30.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src30.csv [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src30_1.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src30.csv [Wed May 22 18:20:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src30.csv [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src30.csv [Wed May 22 18:20:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 19:06:15 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.295222 pixels away [Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000 [Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 19:06:15 2013] Assessing source extent using major [Wed May 22 19:06:15 2013] Source does appear to be extended [Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 19:06:32 2013] XMMSAS src. selection expression = ellipse(16832.421860, 33835.010437, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 22 19:06:32 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31_src.reg [Wed May 22 19:06:32 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (157, 352) - (232, 427) [Wed May 22 19:06:32 2013] XMMSAS bgd. selection expression = annulus(16832.421860, 33835.010437, 1087.500000, 2175.000000, X, Y) && !ellipse(21245.700000, 34170.614000, 3360.656097, 532.323215, 67.413500, X, Y) && !ellipse(20446.827000, 36073.491300, 2266.272065, 547.744816, 66.063000, X, Y) && !ellipse(16619.917297, 31814.660583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17807.741562, 31460.925720, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 22 19:06:32 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31.gif [Wed May 22 19:54:55 2013] Mean detx,y = (4236.52, 12307.41) [Wed May 22 19:54:59 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 19:55:24 2013] Binned source spectrum to 10 counts/bin [Wed May 22 19:55:24 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Wed May 22 19:55:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31_bgd.pi.gz [Wed May 22 21:10:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 22 21:10:36 2013] rmf not generated due to insufficient counts [Wed May 22 22:21:22 2013] Updating aperture counts using extracted products [Wed May 22 22:21:22 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 582.00 [Wed May 22 22:21:22 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2814.00 [Wed May 22 22:21:22 2013] Got source and background scale factors 1276664.000000, 7887415.000000 [Wed May 22 22:21:22 2013] User source parameters: Position = (194.0, 389.5) = 13 25 56.78 -38 16 37.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 126.5 +/- 25.1 Background aperture counts = 455.5 Rate = 0.002 +/- 0.0004 [Wed May 22 22:21:22 2013] Updating counts from extracted products [Wed May 22 22:21:22 2013] Set source signif. to 126.52/21.34 = 5.93 [Wed May 22 22:21:31 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 22:21:31 2013] Using photon index=1.80, rate=0.00221, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31.arf [Wed May 22 22:21:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 22:21:31 2013] Updating source flux to 1.4e-14 [Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete