[Wed May 22 09:27:04 2013] Detection parameters: Position = (231.0, 427.0) = 13 25 43.12 -38 13 48.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 192.4 +/- 21.3 Background counts = 85.1 Rate = 0.003 +/- 0.0004 [Wed May 22 09:27:06 2013] Off-axis axis estimate = 10.53' [Wed May 22 09:31:44 2013] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting [Wed May 22 09:31:44 2013] Initial guess for spatial extent in simple fitting = 11.69" [Wed May 22 09:31:44 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886 [Wed May 22 09:31:44 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.69" [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src9.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src9.csv [Wed May 22 14:50:10 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src9_1.ximg exists [Wed May 22 14:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src9.csv [Wed May 22 14:50:10 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 14:50:11 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src9.csv [Wed May 22 14:50:11 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Wed May 22 14:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src9.csv [Wed May 22 14:50:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 16:05:35 2013] Warning, spatial fit 9 centroid is now closest to src. 11 [Wed May 22 16:05:35 2013] Vigneting correction estimate = 1.000000 [Wed May 22 16:05:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 16:05:35 2013] Assessing source extent using major [Wed May 22 16:05:35 2013] Source does appear to be extended [Wed May 22 16:05:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 16:05:35 2013] Source is confused with source 28 [Wed May 22 16:05:55 2013] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting [Wed May 22 16:05:55 2013] Initial guess for spatial extent in simple fitting = 11.69" [Wed May 22 16:05:55 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886 [Wed May 22 16:05:55 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.69" [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src9.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src9.csv [Wed May 22 18:20:35 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src9_1.ximg exists [Wed May 22 18:20:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src9.csv [Wed May 22 18:20:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src9.csv [Wed May 22 18:20:36 2013] fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Wed May 22 18:20:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src9.csv [Wed May 22 18:20:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 19:06:15 2013] Spatial fit model total counts = 1114.940000, observed total counts = 991.000000 [Wed May 22 19:06:15 2013] Poor agreement between spatial fit and data for source 10 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 22 19:06:15 2013] Source 10 is offset by 7.395128 and -2.427568 pixels which is larger than 2 X fitted extent = 1.304455 x 1.304455, not incorporating fit results [Wed May 22 19:06:15 2013] Vigneting correction estimate = 1.000000 [Wed May 22 19:06:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 19:06:15 2013] Assessing source extent using major [Wed May 22 19:06:15 2013] Source does appear to be extended [Wed May 22 19:06:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 19:06:31 2013] XMMSAS src. selection expression = ellipse(20044.974121, 37101.203583, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 22 19:06:31 2013] Writing source region out to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10_src.reg [Wed May 22 19:06:31 2013] Extracting stamp from image fullrun_pn_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (193, 390) - (268, 465) [Wed May 22 19:06:31 2013] XMMSAS bgd. selection expression = annulus(20044.974121, 37101.203583, 1087.500000, 2175.000000, X, Y) && !ellipse(21013.186310, 37501.932465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20329.548126, 36319.204529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21245.700000, 34170.614000, 3360.656097, 532.323215, 67.413500, X, Y) && !ellipse(21600.595920, 33332.947600, 2036.952059, 467.697613, 67.551500, X, Y) && !ellipse(20446.827000, 36073.491300, 2266.272065, 547.744816, 66.063000, X, Y) && !ellipse(20777.393600, 35300.935000, 1733.264050, 521.536015, 66.532000, X, Y) && !ellipse(20956.445400, 34881.548000, 1706.432049, 451.032013, 64.970000, X, Y) [Wed May 22 19:06:31 2013] Writing fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10.gif [Wed May 22 19:21:42 2013] Mean detx,y = (-11.78, 13927.29) [Wed May 22 19:21:46 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 19:22:07 2013] Binned source spectrum to 10 counts/bin [Wed May 22 19:22:07 2013] Setting source spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Wed May 22 19:22:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Wed May 22 20:45:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 22 20:45:49 2013] rmf not generated due to insufficient counts [Wed May 22 22:21:18 2013] Updating aperture counts using extracted products [Wed May 22 22:21:18 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 747.00 [Wed May 22 22:21:18 2013] Total counts from fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 918.00 [Wed May 22 22:21:18 2013] Got source and background scale factors 1028724.000000, 371212.000000 [Wed May 22 22:21:18 2013] User source parameters: Position = (231.0, 427.0) = 13 25 43.12 -38 13 48.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -1797.0 +/- 28.3 Background aperture counts = 2544.0 Rate = -0.03 +/- 0.0005 [Wed May 22 22:21:18 2013] Updating counts from extracted products [Wed May 22 22:21:18 2013] Set source signif. to -1797.01/50.44 = -35.63 [Wed May 22 22:21:30 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 22:21:30 2013] Using photon index=1.80, rate=-0.0313, arf fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10.arf [Wed May 22 22:21:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 22:21:30 2013] Updated flux is not positive, keeping original flux [Wed May 22 22:21:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 22 22:21:53 2013] xmm0110890101/analysis//spectral/fullrun_pn_xmm0110890101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete