[Wed May 22 09:27:33 2013] Detection parameters:
  Position = (184.2, 118.9) = 13 26 0.61 -38 36 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.6 +/- 12.3
  Background counts = 19.0
  Rate = 0.001 +/- 0.0002

[Wed May 22 09:27:34 2013] Off-axis axis estimate = 15.43'
[Wed May 22 14:50:12 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Wed May 22 14:50:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 14:50:12 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Wed May 22 14:50:12 2013] source mask rpix=3.3, npix_max = 56, mask sum = 63, frac = 1.119
[Wed May 22 14:50:12 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 14.14"
[Wed May 22 15:36:34 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass0_src26.ximg exists
[Wed May 22 15:36:34 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed May 22 15:36:34 2013] Fit fullrun_mos1_xmm0110890101_pi300-10000_cl_pass0_src26 appears to have run properly
[Wed May 22 15:36:34 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed May 22 15:36:35 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed May 22 15:36:35 2013] Fit fullrun_mos1_xmm0110890101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed May 22 16:05:41 2013] Warning, spatial fit 26 centroid is now closest to src. 2
[Wed May 22 16:05:41 2013] Vigneting correction estimate = 1.000000
[Wed May 22 16:05:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 16:05:41 2013] Assessing source extent using major
[Wed May 22 16:05:41 2013] Source does appear to be extended
[Wed May 22 16:05:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 16:05:41 2013] Source is confused with source 2
[Wed May 22 18:20:37 2013] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:20:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 18:20:37 2013] Initial guess for spatial extent in simple fitting = 14.14"
[Wed May 22 18:20:37 2013] source mask rpix=3.3, npix_max = 56, mask sum = 63, frac = 1.119
[Wed May 22 18:20:37 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 14.14"
[Wed May 22 18:54:46 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_src20.ximg exists
[Wed May 22 18:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_src20.csv
[Wed May 22 18:54:46 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed May 22 18:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_src20.csv
[Wed May 22 18:54:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 18:54:47 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed May 22 18:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed May 22 18:54:47 2013] fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed May 22 18:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed May 22 18:54:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110890101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:06:19 2013] Spatial fit model total counts = 374.056000, observed total counts = 420.000000
[Wed May 22 19:06:19 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 19:06:19 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:06:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:06:19 2013] Assessing source extent using major
[Wed May 22 19:06:19 2013] Source does appear to be extended
[Wed May 22 19:06:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:52:06 2013] XMMSAS src. selection expression = ellipse(15973.948669, 10294.837685, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 21:52:06 2013] Writing source region out to fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7_src.reg
[Wed May 22 21:52:06 2013] Extracting stamp from image fullrun_mos1_xmm0110890101_pi300-10000_cl_sm2.00.img.gz, (147, 81) - (222, 156)
[Wed May 22 21:52:06 2013] XMMSAS bgd. selection expression = annulus(15973.948669, 10294.837685, 1087.500000, 2175.000000, X, Y) && !ellipse(16512.678400, 10665.896600, 556.639216, 249.385607, 28.675400, X, Y)
[Wed May 22 21:52:06 2013] Writing fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7.gif
[Wed May 22 22:00:21 2013] Mean detx,y = (8794.49, 13614.15) 
[Wed May 22 22:00:22 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 22:00:32 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 22:00:32 2013] Setting source spectrum file to fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May 22 22:00:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 22 22:10:38 2013] Not generating rmf since there are only 68 counts
[Wed May 22 22:10:38 2013] rmf not generated due to insufficient counts
[Wed May 22 22:21:34 2013] Updating aperture counts using extracted products
[Wed May 22 22:21:34 2013] Total counts from fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 220.00
[Wed May 22 22:21:34 2013] Total counts from fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 698.00
[Wed May 22 22:21:34 2013] Got source and background scale factors 1229426.000000, 6442388.000000
[Wed May 22 22:21:34 2013] User source parameters:
  Position = (184.2, 118.9) = 13 26 0.61 -38 36 15.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.8 +/- 15.9
  Background aperture counts = 133.2
  Rate = 0.001 +/- 0.0003

[Wed May 22 22:21:34 2013] Updating counts from extracted products
[Wed May 22 22:21:34 2013] Set source signif. to 86.80/11.54 = 7.52
[Wed May 22 22:21:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:21:34 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7.arf
[Wed May 22 22:21:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:21:34 2013] Updating source flux to 3.8e-14
[Wed May 22 22:21:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:21:39 2013] xmm0110890101/analysis//spectral/fullrun_mos1_xmm0110890101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete