[Mon May 21 10:57:43 2012] Detection parameters:
  Position = (324.5, 300.1) = 3 44 31.63 32 6 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.3 +/- 18.8
  Background counts = 60.4
  Rate = 0.004 +/- 0.0006

[Mon May 21 10:57:44 2012] Off-axis axis estimate = 1.90'
[Mon May 21 11:03:16 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon May 21 11:03:16 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon May 21 11:03:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.037
[Mon May 21 11:03:16 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 7.38"
[Mon May 21 15:23:54 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src82.ximg exists
[Mon May 21 15:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src82.csv
[Mon May 21 15:23:54 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src82_1.ximg exists
[Mon May 21 15:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src82.csv
[Mon May 21 15:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 15:23:56 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Mon May 21 15:23:56 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Mon May 21 15:23:56 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Mon May 21 17:01:08 2012] Source 86 is offset by 3.055376 and -3.338728 pixels which is larger than
2 X fitted extent = 0.808952 x 0.808952, not incorporating fit results
[Mon May 21 17:01:08 2012] Warning, spatial fit 82 centroid is now closest to src. 29
[Mon May 21 17:01:08 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:01:08 2012] Assessing source extent using major
[Mon May 21 17:01:08 2012] Source does appear to be extended
[Mon May 21 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:01:08 2012] Source is confused with source 89
[Mon May 21 17:01:43 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon May 21 17:01:43 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon May 21 17:01:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.037
[Mon May 21 17:01:43 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 7.38"
[Mon May 21 21:19:17 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src81.ximg exists
[Mon May 21 21:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src81.csv
[Mon May 21 21:19:17 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src81_1.ximg exists
[Mon May 21 21:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src81.csv
[Mon May 21 21:19:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 21:19:19 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Mon May 21 21:19:19 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Mon May 21 21:19:19 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Mon May 21 22:30:49 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 12.909540 pixels away
[Mon May 21 22:30:50 2012] Warning, spatial fit 81 centroid is now closest to src. 29
[Mon May 21 22:30:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 22:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 22:30:50 2012] Assessing source extent using major
[Mon May 21 22:30:50 2012] Source does appear to be extended
[Mon May 21 22:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 22:31:24 2012] XMMSAS src. selection expression = ellipse(28185.349701, 26063.062653, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 22:31:24 2012] Writing source region out to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src86_src.reg
[Mon May 21 22:31:24 2012] Extracting stamp from image fullrun_pn_xmm0110880101_pi300-10000_cl_sm2.00.img.gz, (287, 263) - (362, 338)
[Mon May 21 22:31:24 2012] XMMSAS bgd. selection expression = annulus(28185.349701, 26063.062653, 1087.500000, 2175.000000, X, Y) && !ellipse(26838.669100, 25937.494000, 422.856012, 422.856012, 0.000000, X, Y) && !ellipse(26286.353271, 28996.192993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.536987, 28630.842377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.848358, 28530.673431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.033478, 28089.564209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.767548, 27830.863464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.279022, 27444.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.807500, 26960.435600, 448.604013, 448.604013, 0.000000, X, Y) && !ellipse(29019.492360, 26702.782800, 503.726414, 503.726414, 0.000000, X, Y) && !ellipse(27549.392000, 25730.242000, 445.574413, 445.574413, 0.000000, X, Y) && !ellipse(29370.852142, 23465.472260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25141.618805, 27089.672211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.491669, 23874.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.296417, 25492.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.525879, 25403.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.693280, 25559.187000, 513.001615, 513.001615, 0.000000, X, Y)
[Mon May 21 22:31:24 2012] Writing fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src86.gif
[Tue May 22 00:09:05 2012] Mean detx,y = (1161.54, 1090.50) 
[Tue May 22 00:09:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 00:09:35 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 00:09:36 2012] Setting source spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Tue May 22 00:09:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Tue May 22 02:59:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 02:59:12 2012] rmf not generated due to insufficient counts
[Tue May 22 03:27:24 2012] Updating aperture counts using extracted products
[Tue May 22 03:27:24 2012] Error reading totcts from fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Tue May 22 03:27:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 03:27:27 2012] Using photon index=1.80, rate=0.004, arf fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src86.arf
[Tue May 22 03:27:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 03:27:27 2012] Updating source flux to 1e-14
[Tue May 22 03:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting