[Mon May 21 10:57:40 2012] Detection parameters:
  Position = (442.7, 387.0) = 3 43 51.12 32 13 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1671.9 +/- 49.3
  Background counts = 35.2
  Rate = 0.04 +/- 0.001

[Mon May 21 10:57:44 2012] Off-axis axis estimate = 12.27'
[Mon May 21 11:03:16 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Mon May 21 11:03:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 21 11:03:16 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Mon May 21 11:03:16 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Mon May 21 11:03:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.56"
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src4.csv
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src4.csv
[Mon May 21 15:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 15:23:54 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 21 15:23:54 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 21 15:23:54 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon May 21 17:01:08 2012] Warning, spatial fit 4 centroid is now closest to src. 48
[Mon May 21 17:01:08 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:01:08 2012] Assessing source extent using major
[Mon May 21 17:01:08 2012] Source does appear to be extended
[Mon May 21 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:01:43 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Mon May 21 17:01:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 21 17:01:43 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Mon May 21 17:01:43 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Mon May 21 17:01:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.56"
[Mon May 21 21:19:15 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 21 21:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src4.csv
[Mon May 21 21:19:15 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 21 21:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src4.csv
[Mon May 21 21:19:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 21:19:17 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 21 21:19:17 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 21 21:19:17 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon May 21 22:30:49 2012] Warning, spatial fit 4 centroid is now closest to src. 45
[Mon May 21 22:30:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 22:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 22:30:50 2012] Assessing source extent using major
[Mon May 21 22:30:50 2012] Source does appear to be extended
[Mon May 21 22:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 22:31:19 2012] Counts = 1671.878540, rescaling region sizes by 2.000000
[Mon May 21 22:31:19 2012] XMMSAS src. selection expression = ellipse(38462.644196, 33622.201874, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 21 22:31:19 2012] Writing source region out to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src4_src.reg
[Mon May 21 22:31:19 2012] Extracting stamp from image fullrun_pn_xmm0110880101_pi300-10000_cl_sm2.00.img.gz, (368, 312) - (518, 462)
[Mon May 21 22:31:19 2012] XMMSAS bgd. selection expression = annulus(38462.644196, 33622.201874, 4350.000000, 8700.000000, X, Y) && !ellipse(31345.891380, 38589.709800, 433.370412, 433.370412, 0.000000, X, Y) && !ellipse(33980.889540, 37235.937200, 371.487211, 371.487211, 0.000000, X, Y) && !ellipse(29713.597040, 32815.367200, 369.109611, 369.109611, 0.000000, X, Y) && !ellipse(31661.783997, 32639.809174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30570.218880, 32287.079800, 523.212015, 523.212015, 0.000000, X, Y) && !ellipse(30117.034000, 31000.392000, 349.978410, 349.978410, 0.000000, X, Y) && !ellipse(30036.706980, 30201.816600, 441.460013, 441.460013, 0.000000, X, Y) && !ellipse(32057.954193, 29723.068329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37362.421330, 29279.444800, 561.089616, 561.089616, 0.000000, X, Y) && !ellipse(40168.165985, 27795.761322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33357.782196, 41427.682678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39320.271759, 39410.648956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29084.276245, 37039.474152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39109.895203, 36865.344055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32731.283200, 36912.804000, 516.247215, 516.247215, 0.000000, X, Y) && !ellipse(30745.538696, 36032.939270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36300.755216, 34695.463090, 439.890110, 254.900829, 16.460649, X, Y) && !ellipse(38362.485870, 32972.200256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.047577, 30705.163666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38913.340729, 30643.856384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37182.145680, 28164.367200, 435.060813, 435.060813, 0.000000, X, Y) && !ellipse(31358.669922, 26913.287994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35172.688538, 26547.735596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33360.207458, 25289.910200, 423.993612, 423.993612, 0.000000, X, Y) && !ellipse(35689.768768, 41427.592407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29734.118561, 31637.663055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36428.477570, 31613.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34945.416960, 29680.352600, 420.841612, 420.841612, 0.000000, X, Y) && !ellipse(31387.033600, 29279.758087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33400.090088, 27732.874298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.296417, 25492.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.525879, 25403.086090, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 22:31:19 2012] Writing fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src4.gif
[Mon May 21 22:35:19 2012] Mean detx,y = (10091.63, -8082.96) 
[Mon May 21 22:35:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 22:37:46 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 22:37:46 2012] Setting source spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 21 22:37:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 22 00:35:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 00:35:14 2012] rmf not generated due to insufficient counts
[Tue May 22 03:27:22 2012] Updating aperture counts using extracted products
[Tue May 22 03:27:22 2012] Error reading totcts from fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 22 03:27:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 03:27:24 2012] Using photon index=1.80, rate=0.0442, arf fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src4.arf
[Tue May 22 03:27:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 03:27:24 2012] Updating source flux to 2.1e-13
[Tue May 22 03:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting