[Mon May 21 10:57:41 2012] Detection parameters:
  Position = (338.2, 270.3) = 3 44 26.97 32 4 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1224.1 +/- 42.8
  Background counts = 51.9
  Rate = 0.04 +/- 0.001

[Mon May 21 10:57:44 2012] Off-axis axis estimate = 3.53'
[Mon May 21 11:03:16 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Mon May 21 11:03:16 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Mon May 21 11:03:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.100
[Mon May 21 11:03:16 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.19"
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src30.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src30.csv
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src30.csv
[Mon May 21 15:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 15:23:55 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon May 21 15:23:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon May 21 15:23:55 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon May 21 15:23:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon May 21 15:23:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:01:08 2012] Warning, spatial fit 30 centroid is now closest to src. 58
[Mon May 21 17:01:08 2012] Spatial fit model total counts = 1244.600000, observed total counts = 946.000000
[Mon May 21 17:01:08 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 21 17:01:08 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:01:08 2012] Assessing source extent using major
[Mon May 21 17:01:08 2012] Source does appear to be extended
[Mon May 21 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:01:43 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Mon May 21 17:01:43 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Mon May 21 17:01:43 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.100
[Mon May 21 17:01:43 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.19"
[Mon May 21 21:19:16 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src30.ximg exists
[Mon May 21 21:19:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src30.csv
[Mon May 21 21:19:16 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon May 21 21:19:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src30.csv
[Mon May 21 21:19:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 21:19:18 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon May 21 21:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon May 21 21:19:18 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon May 21 21:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon May 21 21:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 22:30:49 2012] Warning, spatial fit 30 centroid is now closest to src. 58
[Mon May 21 22:30:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 22:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 22:30:50 2012] Assessing source extent using major
[Mon May 21 22:30:50 2012] Source does appear to be extended
[Mon May 21 22:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 22:31:21 2012] Counts = 1224.127930, rescaling region sizes by 2.000000
[Mon May 21 22:31:21 2012] XMMSAS src. selection expression = ellipse(29370.852142, 23465.472260, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 21 22:31:21 2012] Writing source region out to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src31_src.reg
[Mon May 21 22:31:21 2012] Extracting stamp from image fullrun_pn_xmm0110880101_pi300-10000_cl_sm2.00.img.gz, (263, 195) - (413, 345)
[Mon May 21 22:31:22 2012] XMMSAS bgd. selection expression = annulus(29370.852142, 23465.472260, 4350.000000, 8700.000000, X, Y) && !ellipse(26838.669100, 25937.494000, 422.856012, 422.856012, 0.000000, X, Y) && !ellipse(31661.783997, 32639.809174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30570.218880, 32287.079800, 523.212015, 523.212015, 0.000000, X, Y) && !ellipse(26055.086945, 31699.745605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30117.034000, 31000.392000, 349.978410, 349.978410, 0.000000, X, Y) && !ellipse(31207.091644, 17009.071579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20599.596466, 30844.393402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.706980, 30201.816600, 441.460013, 441.460013, 0.000000, X, Y) && !ellipse(26294.490936, 29500.321991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32057.954193, 29723.068329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.490200, 29917.417200, 441.804013, 441.804013, 0.000000, X, Y) && !ellipse(37362.421330, 29279.444800, 561.089616, 561.089616, 0.000000, X, Y) && !ellipse(26286.353271, 28996.192993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.536987, 28630.842377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22019.587112, 28794.965668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.848358, 28530.673431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.033478, 28089.564209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.767548, 27830.863464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.279022, 27444.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.807500, 26960.435600, 448.604013, 448.604013, 0.000000, X, Y) && !ellipse(29019.492360, 26702.782800, 503.726414, 503.726414, 0.000000, X, Y) && !ellipse(27549.392000, 25730.242000, 445.574413, 445.574413, 0.000000, X, Y) && !ellipse(38362.485870, 32972.200256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.047577, 30705.163666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38913.340729, 30643.856384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37182.145680, 28164.367200, 435.060813, 435.060813, 0.000000, X, Y) && !ellipse(25141.618805, 27089.672211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31358.669922, 26913.287994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35172.688538, 26547.735596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25404.694600, 25426.565000, 368.133335, 368.133335, 0.000000, X, Y) && !ellipse(33360.207458, 25289.910200, 423.993612, 423.993612, 0.000000, X, Y) && !ellipse(30830.491669, 23874.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21833.798000, 22853.858000, 1346.880039, 1346.880039, 0.000000, X, Y) && !ellipse(29454.602386, 22655.332550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.103760, 22667.529755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26587.078880, 22029.693000, 386.455211, 386.455211, 0.000000, X, Y) && !ellipse(29734.118561, 31637.663055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36428.477570, 31613.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24506.477386, 31334.979095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.121460, 30971.447174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.536600, 30960.646000, 1405.504040, 410.716012, 77.237500, X, Y) && !ellipse(34945.416960, 29680.352600, 420.841612, 420.841612, 0.000000, X, Y) && !ellipse(31387.033600, 29279.758087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33400.090088, 27732.874298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20831.616968, 27785.655000, 421.212012, 421.212012, 0.000000, X, Y) && !ellipse(21488.362000, 26551.454200, 453.732813, 453.732813, 0.000000, X, Y) && !ellipse(22557.125671, 26086.057861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28185.349701, 26063.062653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.296417, 25492.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.525879, 25403.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.693280, 25559.187000, 513.001615, 513.001615, 0.000000, X, Y) && !ellipse(23520.277374, 22064.700043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36332.617380, 20088.426800, 253.599207, 253.599207, 0.000000, X, Y) && !ellipse(30472.091919, 20112.287079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36851.168854, 19761.268311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.861800, 19688.233600, 609.184818, 609.184818, 0.000000, X, Y)
[Mon May 21 22:31:22 2012] Writing fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src31.gif
[Mon May 21 23:13:23 2012] Mean detx,y = (2719.98, 3431.18) 
[Mon May 21 23:13:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 23:16:49 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 23:16:49 2012] Setting source spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 21 23:16:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue May 22 02:17:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 02:17:32 2012] rmf not generated due to insufficient counts
[Tue May 22 03:27:22 2012] Updating aperture counts using extracted products
[Tue May 22 03:27:22 2012] Error reading totcts from fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue May 22 03:27:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 03:27:25 2012] Using photon index=1.80, rate=0.0426, arf fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src31.arf
[Tue May 22 03:27:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 03:27:25 2012] Updating source flux to 1.2e-13
[Tue May 22 03:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting