[Mon May 21 10:57:41 2012] Detection parameters:
  Position = (218.8, 211.8) = 3 45 7.81 32 0 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1858.3 +/- 52.8
  Background counts = 39.5
  Rate = 0.05 +/- 0.001

[Mon May 21 10:57:44 2012] Off-axis axis estimate = 8.53'
[Mon May 21 11:03:16 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Mon May 21 11:03:16 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Mon May 21 11:03:16 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.028
[Mon May 21 11:03:16 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.69"
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src29.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src29.csv
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src29.csv
[Mon May 21 15:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 15:23:55 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May 21 15:23:55 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May 21 15:23:55 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon May 21 17:01:08 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.913903 pixels away
[Mon May 21 17:01:08 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:01:08 2012] Assessing source extent using major
[Mon May 21 17:01:08 2012] Source does appear to be extended
[Mon May 21 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:01:43 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Mon May 21 17:01:43 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Mon May 21 17:01:43 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.028
[Mon May 21 17:01:43 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.69"
[Mon May 21 21:19:16 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src29.ximg exists
[Mon May 21 21:19:16 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon May 21 21:19:16 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src29 appears to have run properly
[Mon May 21 21:19:18 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon May 21 21:19:18 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May 21 21:19:18 2012] Fit fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon May 21 22:30:49 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.301709 pixels away
[Mon May 21 22:30:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 22:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 22:30:50 2012] Assessing source extent using major
[Mon May 21 22:30:50 2012] Source does appear to be extended
[Mon May 21 22:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 22:31:21 2012] Counts = 1858.281128, rescaling region sizes by 2.000000
[Mon May 21 22:31:21 2012] XMMSAS src. selection expression = ellipse(18982.958420, 18381.890320, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 21 22:31:21 2012] Writing source region out to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src30_src.reg
[Mon May 21 22:31:21 2012] Extracting stamp from image fullrun_pn_xmm0110880101_pi300-10000_cl_sm2.00.img.gz, (144, 137) - (294, 287)
[Mon May 21 22:31:21 2012] XMMSAS bgd. selection expression = annulus(18982.958420, 18381.890320, 4350.000000, 8700.000000, X, Y) && !ellipse(26838.669100, 25937.494000, 422.856012, 422.856012, 0.000000, X, Y) && !ellipse(27897.767548, 27830.863464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.279022, 27444.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.807500, 26960.435600, 448.604013, 448.604013, 0.000000, X, Y) && !ellipse(27549.392000, 25730.242000, 445.574413, 445.574413, 0.000000, X, Y) && !ellipse(18928.932556, 22636.280060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19505.865112, 21601.731964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13126.306290, 20135.084488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25141.618805, 27089.672211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25404.694600, 25426.565000, 368.133335, 368.133335, 0.000000, X, Y) && !ellipse(21833.798000, 22853.858000, 1346.880039, 1346.880039, 0.000000, X, Y) && !ellipse(24866.103760, 22667.529755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26587.078880, 22029.693000, 386.455211, 386.455211, 0.000000, X, Y) && !ellipse(11936.715103, 21979.731140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12724.054749, 21770.623688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18671.869965, 16246.671951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.174400, 27869.101200, 1035.512030, 334.212010, 104.608906, X, Y) && !ellipse(21488.362000, 26551.454200, 453.732813, 453.732813, 0.000000, X, Y) && !ellipse(22557.125671, 26086.057861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28185.349701, 26063.062653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.277374, 22064.700043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.861800, 19688.233600, 609.184818, 609.184818, 0.000000, X, Y)
[Mon May 21 22:31:21 2012] Writing fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src30.gif
[Mon May 21 23:09:49 2012] Mean detx,y = (-6695.02, 10001.48) 
[Mon May 21 23:09:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 23:13:00 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 23:13:01 2012] Setting source spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon May 21 23:13:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue May 22 02:16:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 02:16:44 2012] rmf not generated due to insufficient counts
[Tue May 22 03:27:22 2012] Updating aperture counts using extracted products
[Tue May 22 03:27:22 2012] Error reading totcts from fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue May 22 03:27:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 03:27:25 2012] Using photon index=1.80, rate=0.0491, arf fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src30.arf
[Tue May 22 03:27:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 03:27:25 2012] Updating source flux to 3.3e-13
[Tue May 22 03:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting