[Mon May 21 10:57:41 2012] Detection parameters:
  Position = (321.2, 320.5) = 3 44 32.75 32 8 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.0 +/- 26.0
  Background counts = 62.4
  Rate = 0.009 +/- 0.0007

[Mon May 21 10:57:44 2012] Off-axis axis estimate = 2.30'
[Mon May 21 11:03:16 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Mon May 21 11:03:16 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Mon May 21 11:03:16 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.995
[Mon May 21 11:03:16 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.58"
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src22.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src22.csv
[Mon May 21 15:23:53 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May 21 15:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src22.csv
[Mon May 21 15:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 15:23:54 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May 21 15:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon May 21 15:23:54 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May 21 15:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon May 21 15:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:01:08 2012] Warning, spatial fit 22 centroid is now closest to src. 27
[Mon May 21 17:01:08 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:01:08 2012] Assessing source extent using major
[Mon May 21 17:01:08 2012] Source does appear to be extended
[Mon May 21 17:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:01:43 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Mon May 21 17:01:43 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Mon May 21 17:01:43 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.995
[Mon May 21 17:01:43 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.58"
[Mon May 21 21:19:16 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src22.ximg exists
[Mon May 21 21:19:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src22.csv
[Mon May 21 21:19:16 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon May 21 21:19:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src22.csv
[Mon May 21 21:19:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 21:19:18 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon May 21 21:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 21 21:19:18 2012] fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon May 21 21:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 21 21:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 22:30:49 2012] Source 23 is offset by 0.451139 and 6.419902 pixels which is larger than
2 X fitted extent = 0.870929 x 0.870929, not incorporating fit results
[Mon May 21 22:30:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 22:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 22:30:50 2012] Assessing source extent using major
[Mon May 21 22:30:50 2012] Source does appear to be extended
[Mon May 21 22:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 22:31:21 2012] XMMSAS src. selection expression = ellipse(27897.767548, 27830.863464, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 22:31:21 2012] Writing source region out to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src23_src.reg
[Mon May 21 22:31:21 2012] Extracting stamp from image fullrun_pn_xmm0110880101_pi300-10000_cl_sm2.00.img.gz, (284, 283) - (359, 358)
[Mon May 21 22:31:21 2012] XMMSAS bgd. selection expression = annulus(27897.767548, 27830.863464, 1087.500000, 2175.000000, X, Y) && !ellipse(26838.669100, 25937.494000, 422.856012, 422.856012, 0.000000, X, Y) && !ellipse(30036.706980, 30201.816600, 441.460013, 441.460013, 0.000000, X, Y) && !ellipse(26294.490936, 29500.321991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.490200, 29917.417200, 441.804013, 441.804013, 0.000000, X, Y) && !ellipse(26286.353271, 28996.192993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.536987, 28630.842377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.848358, 28530.673431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.033478, 28089.564209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.279022, 27444.808929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.807500, 26960.435600, 448.604013, 448.604013, 0.000000, X, Y) && !ellipse(29019.492360, 26702.782800, 503.726414, 503.726414, 0.000000, X, Y) && !ellipse(27549.392000, 25730.242000, 445.574413, 445.574413, 0.000000, X, Y) && !ellipse(30804.047577, 30705.163666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25141.618805, 27089.672211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25404.694600, 25426.565000, 368.133335, 368.133335, 0.000000, X, Y) && !ellipse(27441.536600, 30960.646000, 1405.504040, 410.716012, 77.237500, X, Y) && !ellipse(28185.349701, 26063.062653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.296417, 25492.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29752.525879, 25403.086090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.693280, 25559.187000, 513.001615, 513.001615, 0.000000, X, Y)
[Mon May 21 22:31:21 2012] Writing fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src23.gif
[Mon May 21 23:04:43 2012] Mean detx,y = (599.00, -893.42) 
[Mon May 21 23:04:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 23:05:24 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 23:05:25 2012] Setting source spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 21 23:05:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue May 22 01:58:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 01:58:14 2012] rmf not generated due to insufficient counts
[Tue May 22 03:27:22 2012] Updating aperture counts using extracted products
[Tue May 22 03:27:22 2012] Error reading totcts from fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue May 22 03:27:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 03:27:25 2012] Using photon index=1.80, rate=0.00862, arf fullrun_pn_xmm0110880101_pi300-10000_pass1_cl_src23.arf
[Tue May 22 03:27:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 03:27:25 2012] Updating source flux to 2.3e-14
[Tue May 22 03:27:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting