[Mon May 21 10:59:04 2012] Detection parameters:
  Position = (314.5, 310.7) = 3 44 35.06 32 7 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.2 +/- 15.1
  Background counts = 35.4
  Rate = 0.01 +/- 0.002

[Mon May 21 10:59:05 2012] Off-axis axis estimate = 1.47'
[Mon May 21 16:03:37 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Mon May 21 16:03:37 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Mon May 21 16:03:37 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.085
[Mon May 21 16:03:37 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.16"
[Mon May 21 17:00:37 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 21 17:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_src11.csv
[Mon May 21 17:00:37 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 21 17:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_src11.csv
[Mon May 21 17:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:00:37 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 21 17:00:37 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 21 17:00:37 2012] Fit fullrun_mos2_xmm0110880101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 21 17:01:18 2012] Spatial fit model total counts = 74.173300, observed total counts = 73.000000
[Mon May 21 17:01:18 2012] Offset between fit and detection position for source 12 = 0.441319 pixels
[Mon May 21 17:01:18 2012] 70.099000 total counts/ 51.621800 bgd. counts: snr = 2.571696
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.441319 pixels
  Position = (314.2, 310.4) = 3 44 35.15 32 7 35.3
  Extent = 3.6 (2.4-5.2)", rotation angle = 0
  Source counts = 18.5 +/- 8.4
  Background counts = 51.6
  Rate = 0.009 +/- 0.004
[Mon May 21 17:01:18 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:01:18 2012] Assessing source extent using major axis lower bound
[Mon May 21 17:01:18 2012] Source does appear to be extended
[Mon May 21 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 21:46:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 21:46:22 2012] Initial guess for spatial extent in simple fitting = 3.65"
[Mon May 21 21:46:22 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.256
[Mon May 21 21:46:22 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 3.65"
[Mon May 21 22:30:24 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 21 22:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_src11.csv
[Mon May 21 22:30:24 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 21 22:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_src11.csv
[Mon May 21 22:30:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 22:30:25 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 21 22:30:25 2012] fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 21 22:30:25 2012] Fit fullrun_mos2_xmm0110880101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 21 22:30:56 2012] Spatial fit model total counts = 71.779300, observed total counts = 73.000000
[Mon May 21 22:30:56 2012] Offset between fit and detection position for source 12 = 0.090934 pixels
[Mon May 21 22:30:56 2012] 68.004300 total counts/ 50.927800 bgd. counts: snr = 2.392883
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.090934 pixels
  Position = (314.3, 310.4) = 3 44 35.12 32 7 35.6
  Extent = 3.7 (2.5-5.2)", rotation angle = 0
  Source counts = 17.1 +/- 8.2
  Background counts = 50.9
  Rate = 0.009 +/- 0.004
[Mon May 21 22:30:56 2012] Vigneting correction estimate = 1.000000
[Mon May 21 22:30:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 22:30:56 2012] Assessing source extent using major axis lower bound
[Mon May 21 22:30:56 2012] Source does appear to be extended
[Mon May 21 22:30:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 03:20:52 2012] XMMSAS src. selection expression = ellipse(27297.717000, 26956.671000, 222.891606, 222.891606, 0.000000, X, Y)
[Tue May 22 03:20:52 2012] Writing source region out to fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12_src.reg
[Tue May 22 03:20:52 2012] Extracting stamp from image fullrun_mos2_xmm0110880101_pi300-10000_cl_sm2.00.img.gz, (302, 298) - (327, 323)
[Tue May 22 03:20:52 2012] XMMSAS bgd. selection expression = annulus(27297.717000, 26956.671000, 371.486011, 742.972021, X, Y) && !ellipse(26832.050000, 25937.998000, 375.808011, 375.808011, 0.000000, X, Y) && !ellipse(27929.208405, 28249.569550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26426.080600, 28671.374000, 1187.064034, 1187.064034, 0.000000, X, Y) && !ellipse(27399.997345, 25665.039246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26495.685060, 26946.091000, 221.455206, 221.455206, 0.000000, X, Y)
[Tue May 22 03:20:52 2012] Writing fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12.gif
[Tue May 22 03:22:56 2012] Mean detx,y = (20.15, -363.65) 
[Tue May 22 03:22:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 03:23:04 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 03:23:04 2012] Setting source spectrum file to fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 22 03:23:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May 22 03:25:39 2012] Not generating rmf since there are only 17 counts
[Tue May 22 03:25:39 2012] rmf not generated due to insufficient counts
[Tue May 22 03:27:29 2012] Updating aperture counts using extracted products
[Tue May 22 03:27:29 2012] Error reading totcts from fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 22 03:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 03:27:30 2012] Using photon index=1.80, rate=0.00859, arf fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12.arf
[Tue May 22 03:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 03:27:30 2012] Updating source flux to 1.2e-13
[Tue May 22 03:27:39 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 03:27:40 2012] xmm0110880101/analysis//spectral/fullrun_mos2_xmm0110880101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete