[Thu Jul 26 19:19:21 2012] Detection parameters:
  Position = (280.2, 283.0) = 21 7 58.08 -5 17 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5623.5 +/- 89.7
  Background counts = 27.5
  Rate = 0.2 +/- 0.003

[Thu Jul 26 19:19:22 2012] Off-axis axis estimate = 1.73'
[Thu Jul 26 19:56:42 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 19:56:42 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jul 26 19:56:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Thu Jul 26 19:56:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Jul 26 20:30:00 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 26 20:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 26 20:30:00 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 26 20:30:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 26 20:30:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 20:30:00 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 26 20:30:00 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 26 20:30:00 2012] Fit fullrun_mos2_xmm0110860101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 26 20:30:09 2012] Spatial fit model total counts = 5177.240000, observed total counts = 5026.000000
[Thu Jul 26 20:30:09 2012] Offset between fit and detection position for source 1 = 0.053103 pixels
[Thu Jul 26 20:30:09 2012] 5189.570000 total counts/ 1406.810000 bgd. counts: snr = 100.853521
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.053103 pixels
  Position = (280.3, 282.9) = 21 7 58.06 -5 17 41.2
  Extent = 5.1 (4.9-5.2)", rotation angle = 0
  Source counts = 3782.8 +/- 72.0
  Background counts = 1406.8
  Rate = 0.1 +/- 0.002
[Thu Jul 26 20:30:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 20:30:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 20:30:09 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 20:30:09 2012] Source does appear to be extended
[Thu Jul 26 20:30:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 20:56:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 26 20:56:13 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Thu Jul 26 20:56:13 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.087
[Thu Jul 26 20:56:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Thu Jul 26 21:27:19 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 26 21:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_src1.csv
[Thu Jul 26 21:27:19 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 26 21:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_src1.csv
[Thu Jul 26 21:27:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 21:27:20 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 26 21:27:20 2012] fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 26 21:27:20 2012] Fit fullrun_mos2_xmm0110860101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 26 21:27:27 2012] Spatial fit model total counts = 5178.070000, observed total counts = 5026.000000
[Thu Jul 26 21:27:27 2012] Offset between fit and detection position for source 1 = 0.002466 pixels
[Thu Jul 26 21:27:27 2012] 5190.460000 total counts/ 1412.600000 bgd. counts: snr = 100.516246
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002466 pixels
  Position = (280.3, 282.9) = 21 7 58.06 -5 17 41.2
  Extent = 5.0 (4.9-5.2)", rotation angle = 0
  Source counts = 3777.9 +/- 72.0
  Background counts = 1412.6
  Rate = 0.1 +/- 0.002
[Thu Jul 26 21:27:27 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 21:27:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 21:27:27 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 21:27:27 2012] Source does appear to be extended
[Thu Jul 26 21:27:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 22:03:33 2012] Counts = 3777.860000, rescaling region sizes by 2.000000
[Thu Jul 26 22:03:33 2012] XMMSAS src. selection expression = ellipse(24336.814200, 24566.385200, 604.079053, 604.079053, 0.000000, X, Y)
[Thu Jul 26 22:03:33 2012] Writing source region out to fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 26 22:03:33 2012] Extracting stamp from image fullrun_mos2_xmm0110860101_pi300-10000_cl_sm2.00.img.gz, (246, 248) - (315, 318)
[Thu Jul 26 22:03:33 2012] XMMSAS bgd. selection expression = annulus(24336.814200, 24566.385200, 2013.596845, 4027.193689, X, Y)
[Thu Jul 26 22:03:33 2012] Writing fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1.gif
[Thu Jul 26 22:03:37 2012] Mean detx,y = (140.40, 158.23) 
[Thu Jul 26 22:03:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 22:04:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 22:04:07 2012] Setting source spectrum file to fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 22:04:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 26 22:19:41 2012] Updating aperture counts using extracted products
[Thu Jul 26 22:19:41 2012] Error reading totcts from fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 22:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 22:19:42 2012] Using photon index=1.80, rate=0.105, arf fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 22:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 22:19:42 2012] Updating source flux to 1.1e-12
[Thu Jul 26 22:20:14 2012] Reading fit data from xmm0110860101/analysis//spectral/fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 26 22:20:14 2012] Spectral fit parameter nH value = 1.9377e+12
[Thu Jul 26 22:20:14 2012] Spectral fit parameter PhoIndex value = 1.32454
[Thu Jul 26 22:20:14 2012] Failed to get F(0.3-8.0) from xmm0110860101/analysis//spectral/fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 26 22:20:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 22:20:14 2012] Using Nh = 1.9e+12, photon index=1.32, rate=0.105, arf fullrun_mos2_xmm0110860101_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 22:20:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 22:20:14 2012] Updating source flux to 1.4e-12