[Fri Aug  3 03:24:01 2012] Detection parameters:
  Position = (367.3, 304.8) = 16 18 51.26 59 59 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1054.3 +/- 38.9
  Background counts = 17.6
  Rate = 0.1 +/- 0.004

[Fri Aug  3 03:24:02 2012] Off-axis axis estimate = 5.02'
[Fri Aug  3 03:38:15 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 03:38:15 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Fri Aug  3 03:38:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Fri Aug  3 03:38:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.94"
[Fri Aug  3 03:53:55 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 03:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 03:53:55 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 03:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 03:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 03:53:55 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 03:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug  3 03:53:55 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 03:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Aug  3 03:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110662501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 03:54:00 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Fri Aug  3 03:54:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 03:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 03:54:00 2012] Assessing source extent using major
[Fri Aug  3 03:54:00 2012] Source does appear to be extended
[Fri Aug  3 03:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 04:07:43 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 04:07:43 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Fri Aug  3 04:07:43 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Fri Aug  3 04:07:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.94"
[Fri Aug  3 04:20:48 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 04:20:48 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 04:20:48 2012] Fit fullrun_mos2_xmm0110662501_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug  3 04:20:49 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 04:20:49 2012] fullrun_mos2_xmm0110662501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 04:20:49 2012] Fit fullrun_mos2_xmm0110662501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 04:20:53 2012] Spatial fit model total counts = 1063.480000, observed total counts = 1059.000000
[Fri Aug  3 04:20:53 2012] Offset between fit and detection position for source 1 = 0.154334 pixels
[Fri Aug  3 04:20:53 2012] 1062.270000 total counts/ 350.201000 bgd. counts: snr = 38.050765
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154334 pixels
  Position = (367.3, 304.6) = 16 18 51.32 59 59 30.2
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 712.1 +/- 32.6
  Background counts = 350.2
  Rate = 0.06 +/- 0.003
[Fri Aug  3 04:20:53 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 04:20:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 04:20:53 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 04:20:53 2012] Source does appear to be extended
[Fri Aug  3 04:20:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 04:30:51 2012] XMMSAS src. selection expression = ellipse(31902.729400, 26455.110400, 291.801608, 291.801608, 0.000000, X, Y)
[Fri Aug  3 04:30:51 2012] Writing source region out to fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 04:30:51 2012] Extracting stamp from image fullrun_mos2_xmm0110662501_pi300-10000_cl_sm2.00.img.gz, (350, 288) - (384, 321)
[Fri Aug  3 04:30:51 2012] XMMSAS bgd. selection expression = annulus(31902.729400, 26455.110400, 486.336014, 972.672028, X, Y)
[Fri Aug  3 04:30:51 2012] Writing fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 04:30:53 2012] Mean detx,y = (-4102.34, 1213.46) 
[Fri Aug  3 04:30:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 04:31:01 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 04:31:01 2012] Setting source spectrum file to fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 04:31:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  3 04:36:58 2012] Updating aperture counts using extracted products
[Fri Aug  3 04:36:58 2012] Error reading totcts from fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 04:36:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 04:36:58 2012] Using photon index=1.80, rate=0.0584, arf fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 04:36:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 04:36:58 2012] Updating source flux to 9e-13
[Fri Aug  3 04:37:14 2012] Reading fit data from xmm0110662501/analysis//spectral/fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug  3 04:37:14 2012] Spectral fit parameter nH value = 1.5601e+14
[Fri Aug  3 04:37:14 2012] Spectral fit parameter PhoIndex value = 1.97101
[Fri Aug  3 04:37:14 2012] Failed to get F(0.3-8.0) from xmm0110662501/analysis//spectral/fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 04:37:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 04:37:14 2012] Using Nh = 1.6e+14, photon index=1.97, rate=0.0584, arf fullrun_mos2_xmm0110662501_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 04:37:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 04:37:14 2012] Updating source flux to 8.4e-13