[Fri Jun  7 00:38:59 2013] Detection parameters:
  Position = (444.4, 189.1) = 3 19 11.76 11 7 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 8.7
  Background counts = 1.9
  Rate = 0.007 +/- 0.001

[Fri Jun  7 00:38:59 2013] Off-axis axis estimate = 13.22'
[Fri Jun  7 00:39:13 2013] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 00:39:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 00:39:13 2013] Initial guess for spatial extent in simple fitting = 13.04"
[Fri Jun  7 00:39:13 2013] source mask rpix=3.0, npix_max = 48, mask sum = 44, frac = 0.899
[Fri Jun  7 00:39:13 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.04"
[Fri Jun  7 00:39:13 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  7 00:39:13 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  7 00:39:13 2013] Fit fullrun_mos2_xmm0110661301_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Jun  7 00:39:13 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  7 00:39:13 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  7 00:39:13 2013] Fit fullrun_mos2_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun  7 00:39:20 2013] Spatial fit model total counts = 74.370600, observed total counts = 68.000000
[Fri Jun  7 00:39:20 2013] Offset between fit and detection position for source 2 = 0.763443 pixels
[Fri Jun  7 00:39:20 2013] 76.377700 total counts/ 34.844700 bgd. counts: snr = 7.035986
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.763443 pixels
  Position = (443.9, 189.7) = 3 19 11.92 11 7 17.0
  Extent = 9.5 (5.1-14.0)", rotation angle = 0
  Source counts = 41.5 +/- 8.7
  Background counts = 34.8
  Rate = 0.006 +/- 0.001
[Fri Jun  7 00:39:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:39:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:39:20 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 00:39:20 2013] Source does appear to be extended
[Fri Jun  7 00:39:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 00:39:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 00:39:28 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Fri Jun  7 00:39:28 2013] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.896
[Fri Jun  7 00:39:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.54"
[Fri Jun  7 00:39:28 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_src4.csv
[Fri Jun  7 00:39:28 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_src4.csv
[Fri Jun  7 00:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:28 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  7 00:39:28 2013] fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  7 00:39:28 2013] Fit fullrun_mos2_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun  7 00:39:36 2013] Spatial fit model total counts = 68.603100, observed total counts = 64.000000
[Fri Jun  7 00:39:36 2013] Offset between fit and detection position for source 2 = 0.637704 pixels
[Fri Jun  7 00:39:36 2013] 68.658900 total counts/ 25.271500 bgd. counts: snr = 8.630742
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.637704 pixels
  Position = (444.4, 190.1) = 3 19 11.77 11 7 18.8
  Extent = 9.5 (5.0-12.7)", rotation angle = 0
  Source counts = 43.4 +/- 8.3
  Background counts = 25.3
  Rate = 0.006 +/- 0.001
[Fri Jun  7 00:39:36 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:39:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:39:36 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 00:39:36 2013] Source does appear to be extended
[Fri Jun  7 00:39:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 00:39:46 2013] XMMSAS src. selection expression = ellipse(38610.955200, 16487.440200, 568.243216, 568.243216, 0.000000, X, Y)
[Fri Jun  7 00:39:46 2013] Not overwriting source region fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  7 00:39:46 2013] Extracting stamp from image fullrun_mos2_xmm0110661301_pi300-10000_cl_sm2.00.img.gz, (412, 157) - (477, 223)
[Fri Jun  7 00:39:46 2013] XMMSAS bgd. selection expression = annulus(38610.955200, 16487.440200, 947.072027, 1894.144055, X, Y)
[Fri Jun  7 00:39:46 2013] Writing fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2.gif
[Fri Jun  7 00:39:49 2013] Mean detx,y = (15636.36, 4790.33) 
[Fri Jun  7 00:39:51 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 00:40:06 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 00:40:06 2013] Setting source spectrum file to fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  7 00:40:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  7 00:41:36 2013] Not generating rmf since there are only 43 counts
[Fri Jun  7 00:41:36 2013] rmf not generated due to insufficient counts
[Fri Jun  7 00:42:14 2013] Updating aperture counts using extracted products
[Fri Jun  7 00:42:14 2013] Total counts from fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 55.00
[Fri Jun  7 00:42:14 2013] Total counts from fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 47.00
[Fri Jun  7 00:42:14 2013] Got source and background scale factors 944732.000000, 4561461.000000
[Fri Jun  7 00:42:14 2013] User source parameters:
  Position = (444.4, 190.1) = 3 19 11.77 11 7 18.8
  Extent = 9.5 (5.0-12.7)", rotation angle = 0
  Source aperture counts = 45.3 +/- 8.5
  Background aperture counts = 9.7
  Rate = 0.006 +/- 0.001

[Fri Jun  7 00:42:15 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 00:42:15 2013] Using photon index=1.80, rate=0.00603, arf fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2.arf
[Fri Jun  7 00:42:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 00:42:15 2013] Updating source flux to 2.6e-13
[Fri Jun  7 00:42:18 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  7 00:42:19 2013] xmm0110661301/analysis//spectral/fullrun_mos2_xmm0110661301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete