[Fri Jun  7 00:38:58 2013] Detection parameters:
  Position = (231.0, 265.8) = 3 20 14.83 11 12 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.9 +/- 11.7
  Background counts = 2.7
  Rate = 0.01 +/- 0.002

[Fri Jun  7 00:38:58 2013] Off-axis axis estimate = 5.43'
[Fri Jun  7 00:39:12 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 00:39:12 2013] Initial guess for spatial extent in simple fitting = 9.14"
[Fri Jun  7 00:39:12 2013] source mask rpix=2.1, npix_max = 27, mask sum = 27, frac = 0.997
[Fri Jun  7 00:39:12 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.14"
[Fri Jun  7 00:39:12 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  7 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src2.csv
[Fri Jun  7 00:39:12 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  7 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src2.csv
[Fri Jun  7 00:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:13 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  7 00:39:13 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  7 00:39:13 2013] Fit fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun  7 00:39:18 2013] Spatial fit model total counts = 97.946000, observed total counts = 98.000000
[Fri Jun  7 00:39:18 2013] Offset between fit and detection position for source 7 = 0.124362 pixels
[Fri Jun  7 00:39:18 2013] 95.311700 total counts/ 31.708100 bgd. counts: snr = 11.295269
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.124362 pixels
  Position = (231.1, 265.8) = 3 20 14.79 11 12 48.5
  Extent = 5.2 (4.2-6.4)", rotation angle = 0
  Source counts = 63.6 +/- 9.8
  Background counts = 31.7
  Rate = 0.009 +/- 0.001
[Fri Jun  7 00:39:18 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:39:18 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 00:39:18 2013] Source does appear to be extended
[Fri Jun  7 00:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 00:39:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 00:39:27 2013] Initial guess for spatial extent in simple fitting = 5.17"
[Fri Jun  7 00:39:27 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.405
[Fri Jun  7 00:39:27 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.17"
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src2.csv
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src2.csv
[Fri Jun  7 00:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  7 00:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:34 2013] Warning, spatial fit 2 centroid is now closest to src. 4
[Fri Jun  7 00:39:34 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:39:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:39:34 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 00:39:34 2013] Source does appear to be extended
[Fri Jun  7 00:39:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 00:39:44 2013] XMMSAS src. selection expression = ellipse(20061.132240, 23077.969200, 309.934209, 309.934209, 0.000000, X, Y)
[Fri Jun  7 00:39:44 2013] Not overwriting source region fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun  7 00:39:44 2013] Extracting stamp from image fullrun_mos1_xmm0110661301_pi300-10000_cl_sm2.00.img.gz, (213, 248) - (249, 284)
[Fri Jun  7 00:39:44 2013] XMMSAS bgd. selection expression = annulus(20061.132240, 23077.969200, 516.557015, 1033.114030, X, Y)
[Fri Jun  7 00:39:44 2013] Writing fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7.gif
[Fri Jun  7 00:39:44 2013] ../../xmm0110661301/products/events/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0110661301/products/events/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Jun  7 00:39:44 2013] Mean detx,y = (2640.20, 3744.06) 
[Fri Jun  7 00:39:44 2013] ../../xmm0110661301/products/images/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src.img and ../../xmm0110661301/products/images/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Jun  7 00:39:44 2013] ../../xmm0110661301/products/spectra/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0110661301/products/spectra/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Jun  7 00:39:44 2013] Setting source spectrum file to fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun  7 00:39:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun  7 00:39:44 2013] ../../xmm0110661301/products/lightcurves/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0110661301/products/lightcurves/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Jun  7 00:39:46 2013] Not generating rmf since there are only 63 counts
[Fri Jun  7 00:39:46 2013] rmf not generated due to insufficient counts
[Fri Jun  7 00:39:46 2013] fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Fri Jun  7 00:42:09 2013] Updating aperture counts using extracted products
[Fri Jun  7 00:42:09 2013] Total counts from fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 71.00
[Fri Jun  7 00:42:10 2013] Total counts from fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_bgd.pi.gz = 34.00
[Fri Jun  7 00:42:10 2013] Got source and background scale factors 296000.000000, 2341296.000000
[Fri Jun  7 00:42:10 2013] User source parameters:
  Position = (231.1, 265.8) = 3 20 14.79 11 12 48.5
  Extent = 5.2 (4.2-6.4)", rotation angle = 0
  Source aperture counts = 66.7 +/- 9.5
  Background aperture counts = 4.3
  Rate = 0.009 +/- 0.001

[Fri Jun  7 00:42:12 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 00:42:12 2013] Using photon index=1.80, rate=0.00885, arf fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7.arf
[Fri Jun  7 00:42:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 00:42:12 2013] Updating source flux to 1.2e-13
[Fri Jun  7 00:42:17 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun  7 00:42:18 2013] xmm0110661301/analysis//spectral/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete