[Fri Jun  7 00:38:58 2013] Detection parameters:
  Position = (218.3, 334.4) = 3 20 18.61 11 17 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 7.3
  Background counts = 3.0
  Rate = 0.006 +/- 0.001

[Fri Jun  7 00:38:58 2013] Off-axis axis estimate = 6.37'
[Fri Jun  7 00:39:12 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 00:39:12 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Jun  7 00:39:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.783
[Fri Jun  7 00:39:12 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.61"
[Fri Jun  7 00:39:12 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  7 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src7.csv
[Fri Jun  7 00:39:13 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  7 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src7.csv
[Fri Jun  7 00:39:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:13 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  7 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun  7 00:39:13 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  7 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun  7 00:39:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:18 2013] Spatial fit model total counts = 59.436500, observed total counts = 50.000000
[Fri Jun  7 00:39:18 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 00:39:18 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:39:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:39:18 2013] Assessing source extent using major
[Fri Jun  7 00:39:18 2013] Source does appear to be extended
[Fri Jun  7 00:39:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 00:39:27 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 00:39:27 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Jun  7 00:39:27 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.783
[Fri Jun  7 00:39:27 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.61"
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src7.csv
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src7.csv
[Fri Jun  7 00:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun  7 00:39:28 2013] fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  7 00:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun  7 00:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 00:39:34 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 72.588611 pixels away
[Fri Jun  7 00:39:34 2013] Spatial fit model total counts = 58.193800, observed total counts = 50.000000
[Fri Jun  7 00:39:34 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 00:39:34 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 202.319185 pixels away
[Fri Jun  7 00:39:34 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 00:39:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 00:39:34 2013] Assessing source extent using major
[Fri Jun  7 00:39:34 2013] Source does appear to be extended
[Fri Jun  7 00:39:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 00:39:44 2013] XMMSAS src. selection expression = ellipse(18940.663803, 29044.126892, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 00:39:44 2013] Not overwriting source region fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  7 00:39:44 2013] Extracting stamp from image fullrun_mos1_xmm0110661301_pi300-10000_cl_sm2.00.img.gz, (181, 297) - (256, 372)
[Fri Jun  7 00:39:44 2013] XMMSAS bgd. selection expression = annulus(18940.663803, 29044.126892, 1087.500000, 2175.000000, X, Y) && !ellipse(20754.153700, 27821.467800, 418.752812, 418.752812, 0.000000, X, Y) && !ellipse(18244.958200, 30120.900000, 393.288011, 393.288011, 0.000000, X, Y)
[Fri Jun  7 00:39:44 2013] Writing fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4.gif
[Fri Jun  7 00:39:45 2013] ../../xmm0110661301/products/events/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0110661301/products/events/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Jun  7 00:39:45 2013] Mean detx,y = (-2977.00, 6103.54) 
[Fri Jun  7 00:39:45 2013] ../../xmm0110661301/products/images/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src.img and ../../xmm0110661301/products/images/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Jun  7 00:39:45 2013] ../../xmm0110661301/products/spectra/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0110661301/products/spectra/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Jun  7 00:39:45 2013] Setting source spectrum file to fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  7 00:39:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  7 00:39:45 2013] ../../xmm0110661301/products/lightcurves/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0110661301/products/lightcurves/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Jun  7 00:39:46 2013] Not generating rmf since there are only 35 counts
[Fri Jun  7 00:39:46 2013] rmf not generated due to insufficient counts
[Fri Jun  7 00:39:46 2013] fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Fri Jun  7 00:42:11 2013] Updating aperture counts using extracted products
[Fri Jun  7 00:42:11 2013] Total counts from fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 39.00
[Fri Jun  7 00:42:11 2013] Total counts from fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 155.00
[Fri Jun  7 00:42:11 2013] Got source and background scale factors 1176370.000000, 9708376.000000
[Fri Jun  7 00:42:11 2013] User source parameters:
  Position = (218.3, 334.4) = 3 20 18.61 11 17 47.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 20.2 +/- 7.3
  Background aperture counts = 18.8
  Rate = 0.003 +/- 0.001

[Fri Jun  7 00:42:11 2013] Updating counts from extracted products
[Fri Jun  7 00:42:11 2013] Set source signif. to 20.22/4.33 = 4.67
[Fri Jun  7 00:42:12 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 00:42:12 2013] Using photon index=1.80, rate=0.00281, arf fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4.arf
[Fri Jun  7 00:42:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 00:42:12 2013] Updating source flux to 4.3e-14
[Fri Jun  7 00:42:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 00:42:18 2013] xmm0110661301/analysis//spectral/fullrun_mos1_xmm0110661301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete