[Sun Aug 12 11:22:04 2012] Detection parameters:
  Position = (319.1, 386.1) = 3 19 48.77 11 21 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.1 +/- 7.4
  Background counts = 1.9
  Rate = 0.004 +/- 0.001

[Sun Aug 12 11:22:04 2012] Off-axis axis estimate = 6.53'
[Sun Aug 12 12:19:38 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:19:38 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Sun Aug 12 12:19:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.209
[Sun Aug 12 12:19:38 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.69"
[Sun Aug 12 12:38:01 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Aug 12 12:38:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_src7.csv
[Sun Aug 12 12:38:01 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Aug 12 12:38:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_src7.csv
[Sun Aug 12 12:38:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:38:01 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Aug 12 12:38:01 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Aug 12 12:38:01 2012] Fit fullrun_mos2_xmm0110661101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Aug 12 12:38:13 2012] Spatial fit model total counts = 55.833700, observed total counts = 55.000000
[Sun Aug 12 12:38:13 2012] Offset between fit and detection position for source 3 = 0.364374 pixels
[Sun Aug 12 12:38:13 2012] 54.496100 total counts/ 25.558200 bgd. counts: snr = 5.724030
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.364374 pixels
  Position = (318.7, 386.0) = 3 19 48.88 11 21 31.7
  Extent = 7.1 (2.4-10.6)", rotation angle = 0
  Source counts = 28.9 +/- 7.4
  Background counts = 25.6
  Rate = 0.002 +/- 0.0006
[Sun Aug 12 12:38:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:38:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:38:13 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 12:38:13 2012] Source does appear to be extended
[Sun Aug 12 12:38:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 13:26:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 13:26:48 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sun Aug 12 13:26:48 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.876
[Sun Aug 12 13:26:48 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.12"
[Sun Aug 12 13:47:01 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug 12 13:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_src7.csv
[Sun Aug 12 13:47:01 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug 12 13:47:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_src7.csv
[Sun Aug 12 13:47:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:47:02 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug 12 13:47:02 2012] fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug 12 13:47:02 2012] Fit fullrun_mos2_xmm0110661101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Aug 12 13:47:15 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Sun Aug 12 13:47:15 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 13:47:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 13:47:15 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 13:47:15 2012] Source does appear to be extended
[Sun Aug 12 13:47:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:25:18 2012] XMMSAS src. selection expression = ellipse(27678.773600, 33536.859400, 427.124872, 427.124872, 0.000000, X, Y)
[Sun Aug 12 14:25:18 2012] Writing source region out to fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 12 14:25:18 2012] Extracting stamp from image fullrun_mos2_xmm0110661101_pi300-10000_cl_sm2.00.img.gz, (294, 361) - (343, 411)
[Sun Aug 12 14:25:18 2012] XMMSAS bgd. selection expression = annulus(27678.773600, 33536.859400, 711.874787, 1423.749575, X, Y)
[Sun Aug 12 14:25:18 2012] Writing fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3.gif
[Sun Aug 12 14:27:26 2012] Mean detx,y = (1221.83, -9441.92) 
[Sun Aug 12 14:27:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 14:27:53 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 14:27:53 2012] Setting source spectrum file to fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 14:27:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Aug 12 14:29:51 2012] Not generating rmf since there are only 28 counts
[Sun Aug 12 14:29:51 2012] rmf not generated due to insufficient counts
[Sun Aug 12 14:30:24 2012] Updating aperture counts using extracted products
[Sun Aug 12 14:30:24 2012] Error reading totcts from fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 14:30:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 14:30:24 2012] Using photon index=1.80, rate=0.0025, arf fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3.arf
[Sun Aug 12 14:30:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 14:30:24 2012] Updating source flux to 4e-14
[Sun Aug 12 14:30:44 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Aug 12 14:30:45 2012] xmm0110661101/analysis//spectral/fullrun_mos2_xmm0110661101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete