[Sun Aug 12 11:21:24 2012] Detection parameters:
  Position = (231.1, 265.8) = 3 20 14.77 11 12 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.5 +/- 15.2
  Background counts = 2.7
  Rate = 0.02 +/- 0.001

[Sun Aug 12 11:21:24 2012] Off-axis axis estimate = 5.43'
[Sun Aug 12 11:51:04 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 11:51:04 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Sun Aug 12 11:51:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.850
[Sun Aug 12 11:51:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.14"
[Sun Aug 12 12:19:37 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug 12 12:19:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_src2.csv
[Sun Aug 12 12:19:37 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug 12 12:19:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_src2.csv
[Sun Aug 12 12:19:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:19:37 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug 12 12:19:37 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug 12 12:19:37 2012] Fit fullrun_mos1_xmm0110661101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug 12 12:38:09 2012] Spatial fit model total counts = 169.691000, observed total counts = 167.000000
[Sun Aug 12 12:38:09 2012] Offset between fit and detection position for source 8 = 0.121733 pixels
[Sun Aug 12 12:38:09 2012] 170.095300 total counts/ 62.949300 bgd. counts: snr = 13.504562
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.121733 pixels
  Position = (231.1, 265.7) = 3 20 14.79 11 12 48.0
  Extent = 4.8 (3.7-6.4)", rotation angle = 0
  Source counts = 107.1 +/- 13.0
  Background counts = 62.9
  Rate = 0.009 +/- 0.001
[Sun Aug 12 12:38:09 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:38:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:38:09 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 12:38:09 2012] Source does appear to be extended
[Sun Aug 12 12:38:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 13:03:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 13:03:12 2012] Initial guess for spatial extent in simple fitting = 4.84"
[Sun Aug 12 13:03:12 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.154
[Sun Aug 12 13:03:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.84"
[Sun Aug 12 13:26:48 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug 12 13:26:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_src2.csv
[Sun Aug 12 13:26:48 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug 12 13:26:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_src2.csv
[Sun Aug 12 13:26:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:26:48 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug 12 13:26:48 2012] fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug 12 13:26:48 2012] Fit fullrun_mos1_xmm0110661101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Aug 12 13:47:11 2012] Spatial fit model total counts = 164.032000, observed total counts = 162.000000
[Sun Aug 12 13:47:11 2012] Offset between fit and detection position for source 8 = 0.082028 pixels
[Sun Aug 12 13:47:11 2012] 166.039100 total counts/ 51.623100 bgd. counts: snr = 15.924460
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.082028 pixels
  Position = (231.1, 265.6) = 3 20 14.79 11 12 47.6
  Extent = 5.4 (4.0-6.5)", rotation angle = 0
  Source counts = 114.4 +/- 12.9
  Background counts = 51.6
  Rate = 0.01 +/- 0.001
[Sun Aug 12 13:47:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 13:47:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 13:47:11 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 13:47:11 2012] Source does appear to be extended
[Sun Aug 12 13:47:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:12:53 2012] XMMSAS src. selection expression = ellipse(20053.491780, 23057.010600, 321.674409, 321.674409, 0.000000, X, Y)
[Sun Aug 12 14:12:53 2012] Writing source region out to fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8_src.reg
[Sun Aug 12 14:12:53 2012] Extracting stamp from image fullrun_mos1_xmm0110661101_pi300-10000_cl_sm2.00.img.gz, (213, 247) - (250, 284)
[Sun Aug 12 14:12:53 2012] XMMSAS bgd. selection expression = annulus(20053.491780, 23057.010600, 536.124015, 1072.248031, X, Y)
[Sun Aug 12 14:12:53 2012] Writing fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8.gif
[Sun Aug 12 14:13:35 2012] Mean detx,y = (2648.63, 3746.35) 
[Sun Aug 12 14:13:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 14:13:51 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 14:13:51 2012] Setting source spectrum file to fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Aug 12 14:13:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Aug 12 14:30:22 2012] Updating aperture counts using extracted products
[Sun Aug 12 14:30:22 2012] Error reading totcts from fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Aug 12 14:30:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 14:30:23 2012] Using photon index=1.80, rate=0.00988, arf fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8.arf
[Sun Aug 12 14:30:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 14:30:23 2012] Updating source flux to 1.2e-13
[Sun Aug 12 14:30:44 2012] Reading fit data from xmm0110661101/analysis//spectral/fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8_pl.csv
[Sun Aug 12 14:30:44 2012] Spectral fit parameter nH value = 4.74969e+21
[Sun Aug 12 14:30:44 2012] Spectral fit parameter PhoIndex value = 1.67953
[Sun Aug 12 14:30:44 2012] Failed to get F(0.3-8.0) from xmm0110661101/analysis//spectral/fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 14:30:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 14:30:44 2012] Using Nh = 4.7e+21, photon index=1.68, rate=0.00988, arf fullrun_mos1_xmm0110661101_pi300-10000_pass1_cl_src8.arf
[Sun Aug 12 14:30:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 14:30:44 2012] Updating source flux to 1.8e-13