[Mon May 28 10:09:04 2012] Detection parameters:
  Position = (286.3, 93.4) = 11 26 4.53 42 39 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.0 +/- 9.5
  Background counts = 5.5
  Rate = 0.005 +/- 0.0007

[Mon May 28 10:09:05 2012] Off-axis axis estimate = 14.89'
[Mon May 28 10:20:06 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:20:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 10:20:06 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Mon May 28 10:20:06 2012] source mask rpix=3.2, npix_max = 54, mask sum = 41, frac = 0.753
[Mon May 28 10:20:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.88"
[Mon May 28 10:29:04 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 10:29:04 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 10:29:04 2012] Fit fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon May 28 10:29:04 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 10:29:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 28 10:29:04 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 10:29:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 28 10:29:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110660401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 10:40:51 2012] Spatial fit model total counts = 97.169600, observed total counts = 93.000000
[Mon May 28 10:40:51 2012] Offset between fit and detection position for source 1 = 0.558499 pixels
[Mon May 28 10:40:51 2012] 99.250600 total counts/ 78.209900 bgd. counts: snr = 2.379191
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.558499 pixels
  Position = (286.7, 93.0) = 11 26 4.37 42 39 49.2
  Extent = 3.8" x 3.8", rotation angle = 0
  Source counts = 21.0 +/- 10.0
  Background counts = 78.2
  Rate = 0.002 +/- 0.0008
[Mon May 28 10:40:51 2012] Vigneting correction estimate = 1.000000
[Mon May 28 10:40:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 10:40:51 2012] Assessing source extent using major
[Mon May 28 10:40:51 2012] Source does appear to be extended
[Mon May 28 10:40:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 10:51:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 10:51:43 2012] Initial guess for spatial extent in simple fitting = 3.83"
[Mon May 28 10:51:43 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.787
[Mon May 28 10:51:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.83"
[Mon May 28 11:02:07 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 11:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_src1.csv
[Mon May 28 11:02:07 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 11:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_src1.csv
[Mon May 28 11:02:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:02:07 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 11:02:07 2012] fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 11:02:07 2012] Fit fullrun_mos1_xmm0110660401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 11:09:37 2012] Spatial fit model total counts = 62.066500, observed total counts = 62.000000
[Mon May 28 11:09:37 2012] Offset between fit and detection position for source 1 = 0.503396 pixels
[Mon May 28 11:09:37 2012] 61.782800 total counts/ 20.494100 bgd. counts: snr = 9.120461
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.503396 pixels
  Position = (286.4, 93.3) = 11 26 4.50 42 39 50.9
  Extent = 6.6 (5.6-7.3)", rotation angle = 0
  Source counts = 41.3 +/- 7.9
  Background counts = 20.5
  Rate = 0.003 +/- 0.0006
[Mon May 28 11:09:37 2012] Vigneting correction estimate = 1.000000
[Mon May 28 11:09:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 11:09:37 2012] Assessing source extent using major axis lower bound
[Mon May 28 11:09:37 2012] Source does appear to be extended
[Mon May 28 11:09:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 11:13:38 2012] XMMSAS src. selection expression = ellipse(24864.670400, 8072.862400, 397.911611, 397.911611, 0.000000, X, Y)
[Mon May 28 11:13:38 2012] Writing source region out to fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 11:13:38 2012] Extracting stamp from image fullrun_mos1_xmm0110660401_pi300-10000_cl_sm2.00.img.gz, (263, 70) - (309, 116)
[Mon May 28 11:13:38 2012] XMMSAS bgd. selection expression = annulus(24864.670400, 8072.862400, 663.186019, 1326.372038, X, Y)
[Mon May 28 11:13:38 2012] Writing fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1.gif
[Mon May 28 11:13:39 2012] Mean detx,y = (12919.51, 9297.18) 
[Mon May 28 11:13:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 11:13:50 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 11:13:50 2012] Setting source spectrum file to fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 11:13:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 11:14:40 2012] Not generating rmf since there are only 41 counts
[Mon May 28 11:14:40 2012] rmf not generated due to insufficient counts
[Mon May 28 11:17:27 2012] Updating aperture counts using extracted products
[Mon May 28 11:17:27 2012] Error reading totcts from fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 11:17:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 11:17:27 2012] Using photon index=1.80, rate=0.00338, arf fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1.arf
[Mon May 28 11:17:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 11:17:27 2012] Updating source flux to 1e-13
[Mon May 28 11:17:28 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 28 11:17:29 2012] xmm0110660401/analysis//spectral/fullrun_mos1_xmm0110660401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete