[Fri May 10 20:49:33 2013] Detection parameters:
  Position = (343.1, 253.9) = 10 58 44.05 86 8 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.7 +/- 9.7
  Background counts = 9.9
  Rate = 0.008 +/- 0.001

[Fri May 10 20:49:33 2013] Off-axis axis estimate = 4.58'
[Fri May 10 20:59:21 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Fri May 10 20:59:21 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Fri May 10 20:59:21 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Fri May 10 20:59:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.72"
[Fri May 10 21:00:54 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 10 21:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_src1.csv
[Fri May 10 21:00:54 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 10 21:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_src1.csv
[Fri May 10 21:00:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:00:54 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 21:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 21:00:54 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 21:00:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 21:00:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110660301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:00:57 2013] Spatial fit model total counts = 85.592000, observed total counts = 75.000000
[Fri May 10 21:00:57 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:00:57 2013] Assessing source extent using major
[Fri May 10 21:00:57 2013] Source does appear to be extended
[Fri May 10 21:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:10:39 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:10:39 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Fri May 10 21:10:39 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Fri May 10 21:10:39 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.72"
[Fri May 10 21:12:11 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 10 21:12:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_src1.csv
[Fri May 10 21:12:11 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 10 21:12:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_src1.csv
[Fri May 10 21:12:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:12:11 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 10 21:12:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 10 21:12:11 2013] fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 10 21:12:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 10 21:12:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110660301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:12:13 2013] Spatial fit model total counts = 85.578500, observed total counts = 75.000000
[Fri May 10 21:12:13 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:12:13 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:12:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:12:13 2013] Assessing source extent using major
[Fri May 10 21:12:13 2013] Source does appear to be extended
[Fri May 10 21:12:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:16:55 2013] XMMSAS src. selection expression = ellipse(29805.037048, 22037.385101, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 21:16:55 2013] Writing source region out to fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1_src.reg
[Fri May 10 21:16:55 2013] Extracting stamp from image fullrun_mos2_xmm0110660301_pi300-10000_cl_sm2.00.img.gz, (306, 216) - (381, 291)
[Fri May 10 21:16:55 2013] XMMSAS bgd. selection expression = annulus(29805.037048, 22037.385101, 1087.500000, 2175.000000, X, Y)
[Fri May 10 21:16:55 2013] Writing fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1.gif
[Fri May 10 21:16:56 2013] Mean detx,y = (-927.92, 3404.45) 
[Fri May 10 21:16:57 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 21:17:02 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 21:17:02 2013] Setting source spectrum file to fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 10 21:17:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 10 21:17:02 2013] Not generating rmf since there are only 57 counts
[Fri May 10 21:17:02 2013] rmf not generated due to insufficient counts
[Fri May 10 21:17:16 2013] Updating aperture counts using extracted products
[Fri May 10 21:17:16 2013] Total counts from fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 65.00
[Fri May 10 21:17:16 2013] Total counts from fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 303.00
[Fri May 10 21:17:16 2013] Got source and background scale factors 1146380.000000, 10693840.000000
[Fri May 10 21:17:16 2013] User source parameters:
  Position = (343.1, 253.9) = 10 58 44.05 86 8 12.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.5 +/- 9.1
  Background aperture counts = 32.5
  Rate = 0.004 +/- 0.001

[Fri May 10 21:17:16 2013] Updating counts from extracted products
[Fri May 10 21:17:16 2013] Set source signif. to 32.52/5.70 = 5.71
[Fri May 10 21:17:16 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 21:17:16 2013] Using photon index=1.80, rate=0.00424, arf fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1.arf
[Fri May 10 21:17:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 21:17:16 2013] Updating source flux to 5.6e-14
[Fri May 10 21:17:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 21:17:19 2013] xmm0110660301/analysis//spectral/fullrun_mos2_xmm0110660301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete