[Fri Jun  1 14:01:58 2012] Detection parameters:
  Position = (161.0, 277.7) = 2 56 41.83 19 28 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.8 +/- 10.8
  Background counts = 4.7
  Rate = 0.008 +/- 0.001

[Fri Jun  1 14:01:58 2012] Off-axis axis estimate = 10.08'
[Fri Jun  1 14:28:31 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 14:28:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 14:28:31 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Fri Jun  1 14:28:31 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Fri Jun  1 14:28:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.47"
[Fri Jun  1 14:51:34 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  1 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 14:51:34 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  1 14:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 14:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 14:51:34 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  1 14:51:34 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  1 14:51:34 2012] Fit fullrun_mos2_xmm0110660101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun  1 14:51:45 2012] Spatial fit model total counts = 102.424000, observed total counts = 103.000000
[Fri Jun  1 14:51:45 2012] Offset between fit and detection position for source 5 = 0.134188 pixels
[Fri Jun  1 14:51:45 2012] 101.599800 total counts/ 54.582100 bgd. counts: snr = 6.364089
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.134188 pixels
  Position = (161.0, 277.6) = 2 56 41.81 19 28 15.6
  Extent = 4.4 (3.4-5.5)", rotation angle = 0
  Source counts = 47.0 +/- 10.1
  Background counts = 54.6
  Rate = 0.003 +/- 0.0006
[Fri Jun  1 14:51:45 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:51:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:51:45 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:51:45 2012] Source does appear to be extended
[Fri Jun  1 14:51:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:09:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 15:09:14 2012] Initial guess for spatial extent in simple fitting = 4.36"
[Fri Jun  1 15:09:14 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Fri Jun  1 15:09:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.36"
[Fri Jun  1 15:20:58 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  1 15:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 15:20:58 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  1 15:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 15:20:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 15:20:58 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  1 15:20:58 2012] fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  1 15:20:58 2012] Fit fullrun_mos2_xmm0110660101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun  1 15:21:02 2012] Spatial fit model total counts = 102.463000, observed total counts = 103.000000
[Fri Jun  1 15:21:02 2012] Offset between fit and detection position for source 5 = 0.006696 pixels
[Fri Jun  1 15:21:02 2012] 101.640600 total counts/ 55.054700 bgd. counts: snr = 6.278520
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.006696 pixels
  Position = (161.1, 277.6) = 2 56 41.81 19 28 15.5
  Extent = 4.2 (3.4-5.5)", rotation angle = 0
  Source counts = 46.6 +/- 10.1
  Background counts = 55.1
  Rate = 0.003 +/- 0.0006
[Fri Jun  1 15:21:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 15:21:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 15:21:02 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 15:21:02 2012] Source does appear to be extended
[Fri Jun  1 15:21:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:39:35 2012] XMMSAS src. selection expression = ellipse(13963.021780, 24100.576600, 254.746807, 254.746807, 0.000000, X, Y)
[Fri Jun  1 15:39:35 2012] Writing source region out to fullrun_mos2_xmm0110660101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun  1 15:39:35 2012] Extracting stamp from image fullrun_mos2_xmm0110660101_pi300-10000_cl_sm2.00.img.gz, (146, 263) - (176, 292)
[Fri Jun  1 15:39:35 2012] XMMSAS bgd. selection expression = annulus(13963.021780, 24100.576600, 424.578012, 849.156024, X, Y)
[Fri Jun  1 15:39:35 2012] Writing fullrun_mos2_xmm0110660101_pi300-10000_pass1_cl_src5.gif
[Fri Jun  1 15:40:31 2012] Mean detx,y = (-9814.15, 3383.78) 
[Fri Jun  1 15:40:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:40:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:40:38 2012] Setting source spectrum file to fullrun_mos2_xmm0110660101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 15:40:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110660101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun  1 15:50:45 2012] Not generating rmf since there are only 46 counts
[Fri Jun  1 15:50:45 2012] rmf not generated due to insufficient counts
[Fri Jun  1 15:51:27 2012] Updating aperture counts using extracted products
[Fri Jun  1 15:51:27 2012] Error reading totcts from fullrun_mos2_xmm0110660101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 15:51:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 15:51:27 2012] Using photon index=1.80, rate=0.00296, arf fullrun_mos2_xmm0110660101_pi300-10000_pass1_cl_src5.arf
[Fri Jun  1 15:51:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 15:51:27 2012] Updating source flux to 7e-14
[Fri Jun  1 15:51:55 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting