[Mon May 13 09:51:43 2013] Detection parameters:
  Position = (307.8, 319.8) = 7 55 5.21 22 0 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23213.5 +/- 180.3
  Background counts = 8.0
  Rate = 1 +/- 0.008

[Mon May 13 09:51:43 2013] Off-axis axis estimate = 1.69'
[Mon May 13 10:52:26 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 13 10:52:26 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 13 10:52:26 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon May 13 10:52:26 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon May 13 11:24:47 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 11:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_src1.csv
[Mon May 13 11:24:47 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 11:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_src1.csv
[Mon May 13 11:24:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:24:47 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 11:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 11:24:47 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 11:24:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 11:24:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:24:58 2013] Source 1 is offset by -6.932274 and 5.451317 pixels which is larger than
2 X fitted extent = 0.835894 x 0.835894, not incorporating fit results
[Mon May 13 11:24:58 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:24:58 2013] Assessing source extent using major
[Mon May 13 11:24:58 2013] Source does appear to be extended
[Mon May 13 11:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 11:57:25 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 13 11:57:25 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 13 11:57:25 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon May 13 11:57:25 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Mon May 13 12:28:20 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 12:28:20 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 12:28:20 2013] Fit fullrun_mos2_xmm0110070401_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon May 13 12:28:20 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 12:28:20 2013] fullrun_mos2_xmm0110070401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 12:28:20 2013] Fit fullrun_mos2_xmm0110070401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 13 12:28:29 2013] Spatial fit model total counts = 21455.100000, observed total counts = 20439.000000
[Mon May 13 12:28:29 2013] Offset between fit and detection position for source 1 = 0.279788 pixels
[Mon May 13 12:28:29 2013] 21513.410000 total counts/ 5617.210000 bgd. counts: snr = 212.096249
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.279788 pixels
  Position = (307.5, 319.6) = 7 55 5.28 22 0 4.7
  Extent = 5.4 (5.3-5.5)" x 4.8 (4.7-4.9)", rotation angle = 346 (340-351) degrees
  Source counts = 15896.2 +/- 146.7
  Background counts = 5617.2
  Rate = 0.7 +/- 0.007
[Mon May 13 12:28:29 2013] Vigneting correction estimate = 1.000000
[Mon May 13 12:28:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 12:28:29 2013] Assessing source extent using major axis lower bound
[Mon May 13 12:28:29 2013] Source does appear to be extended
[Mon May 13 12:28:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Mon May 13 13:10:25 2013] Counts = 15896.200000, rescaling region sizes by 3.000000
[Mon May 13 13:10:25 2013] XMMSAS src. selection expression = ellipse(26707.251400, 27755.670600, 972.633628, 863.730025, 346.426660, X, Y)
[Mon May 13 13:10:25 2013] Writing source region out to fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 13:10:25 2013] Extracting stamp from image fullrun_mos2_xmm0110070401_pi300-10000_cl_sm2.00.img.gz, (252, 264) - (363, 375)
[Mon May 13 13:10:25 2013] XMMSAS bgd. selection expression = annulus(26707.251400, 27755.670600, 4863.168140, 9726.336280, X, Y) && !ellipse(36507.854860, 19697.217000, 886.248026, 495.289614, 124.833306, X, Y) && !ellipse(19356.207520, 33288.370000, 546.466416, 338.927210, 117.517846, X, Y) && !ellipse(36606.441200, 26642.870600, 536.593615, 536.593615, 0.000000, X, Y) && !ellipse(25548.732780, 37783.406000, 558.939216, 558.939216, 0.000000, X, Y) && !ellipse(21014.512497, 20247.571442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29133.427200, 36393.029000, 697.976020, 697.976020, 0.000000, X, Y)
[Mon May 13 13:10:25 2013] Writing fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1.gif
[Mon May 13 13:10:29 2013] Mean detx,y = (73.30, 26.36) 
[Mon May 13 13:10:30 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 13:13:57 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 13:13:57 2013] Setting source spectrum file to fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 13:13:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 13 13:23:24 2013] Updating aperture counts using extracted products
[Mon May 13 13:23:24 2013] Total counts from fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 20918.00
[Mon May 13 13:23:24 2013] Total counts from fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3187.00
[Mon May 13 13:23:24 2013] Got source and background scale factors 2446468.000000, 106200739.000000
[Mon May 13 13:23:24 2013] User source parameters:
  Position = (307.5, 319.6) = 7 55 5.28 22 0 4.7
  Extent = 5.4 (5.3-5.5)" x 4.8 (4.7-4.9)", rotation angle = 346 (340-351) degrees
  Source aperture counts = 20844.6 +/- 145.6
  Background aperture counts = 73.4
  Rate = 0.9 +/- 0.006

[Mon May 13 13:23:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 13:23:26 2013] Using photon index=1.80, rate=0.709, arf fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1.arf
[Mon May 13 13:23:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 13:23:26 2013] Updating source flux to 7.4e-12
[Mon May 13 13:23:28 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon May 13 13:23:29 2013] xmm0110070401/analysis//spectral/fullrun_mos2_xmm0110070401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete