[Mon May 13 09:51:21 2013] Detection parameters:
  Position = (322.1, 410.4) = 7 55 0.71 22 6 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.3 +/- 7.6
  Background counts = 6.0
  Rate = 0.002 +/- 0.0005

[Mon May 13 09:51:21 2013] Off-axis axis estimate = 8.30'
[Mon May 13 10:07:40 2013] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Mon May 13 10:07:40 2013] Initial guess for spatial extent in simple fitting = 10.58"
[Mon May 13 10:07:40 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Mon May 13 10:07:40 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.58"
[Mon May 13 10:52:25 2013] fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_src21.ximg exists
[Mon May 13 10:52:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_src21.csv
[Mon May 13 10:52:25 2013] fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon May 13 10:52:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_src21.csv
[Mon May 13 10:52:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 10:52:26 2013] fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon May 13 10:52:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May 13 10:52:26 2013] fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon May 13 10:52:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May 13 10:52:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110070401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 11:24:54 2013] Source 16 is offset by -4.745838 and 0.536450 pixels which is larger than
2 X fitted extent = 1.265416 x 1.265416, not incorporating fit results
[Mon May 13 11:24:54 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.442493 pixels away
[Mon May 13 11:24:54 2013] Vigneting correction estimate = 1.000000
[Mon May 13 11:24:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 11:24:54 2013] Assessing source extent using major
[Mon May 13 11:24:54 2013] Source does appear to be extended
[Mon May 13 11:24:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 11:24:54 2013] Deleting source due to low Poisson probability 0.9