[Sun May 20 10:43:53 2012] Detection parameters:
  Position = (257.8, 278.7) = 11 24 50.36 -59 18 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.9 +/- 31.3
  Background counts = 212.4
  Rate = 0.02 +/- 0.004

[Sun May 20 10:43:53 2012] Off-axis axis estimate = 3.28'
[Sun May 20 10:52:03 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:52:03 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Sun May 20 10:52:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.127
[Sun May 20 10:52:03 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 8.07"
[Sun May 20 17:47:52 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src58.ximg exists
[Sun May 20 17:47:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src58.csv
[Sun May 20 17:47:52 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src58_1.ximg exists
[Sun May 20 17:47:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src58.csv
[Sun May 20 17:47:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:47:53 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sun May 20 17:47:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun May 20 17:47:53 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sun May 20 17:47:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun May 20 17:47:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:10:47 2012] Source 58 is offset by 4.145157 and 2.954557 pixels which is larger than
2 X fitted extent = 3.351131 x 0.927329, not incorporating fit results
[Mon May 21 17:10:48 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:10:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:10:48 2012] Assessing source extent using major
[Mon May 21 17:10:48 2012] Source does appear to be extended
[Mon May 21 17:10:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:10:48 2012] Deleting source due to low Poisson probability 0.9