[Sun May 20 10:43:48 2012] Detection parameters: Position = (281.9, 318.0) = 11 24 36.65 -59 15 51.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 15374.6 +/- 157.5 Background counts = 436.5 Rate = 2 +/- 0.02 [Sun May 20 10:43:53 2012] Off-axis axis estimate = 1.86' [Sun May 20 10:52:03 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting [Sun May 20 10:52:03 2012] Initial guess for spatial extent in simple fitting = 7.36" [Sun May 20 10:52:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833 [Sun May 20 10:52:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36" [Sun May 20 17:47:51 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src1.ximg exists [Sun May 20 17:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src1.csv [Sun May 20 17:47:51 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src1_1.ximg exists [Sun May 20 17:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src1.csv [Sun May 20 17:47:51 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 20 17:47:52 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sun May 20 17:47:52 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sun May 20 17:47:52 2012] Fit fullrun_pn_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Mon May 21 17:10:47 2012] Spatial fit model total counts = 46264.000000, observed total counts = 48550.000000 [Mon May 21 17:10:47 2012] Offset between fit and detection position for source 1 = 3.737524 pixels [Mon May 21 17:10:47 2012] 43762.000000 total counts/ 25600.000000 bgd. counts: snr = 113.512500 Spatial fit parameters: Offset between fit and detection position for source 1 = 3.737524 pixels Position = (284.8, 320.3) = 11 24 34.97 -59 15 42.3 Extent = 14.7 (14.7-29.4)", rotation angle = 0 Source counts = 18162.0 +/- 209.2 Background counts = 25600.0 Rate = 2 +/- 0.03 [Mon May 21 17:10:47 2012] Vigneting correction estimate = 1.000000 [Mon May 21 17:10:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 21 17:10:47 2012] Assessing source extent using major axis lower bound [Mon May 21 17:10:47 2012] Source does appear to be extended [Mon May 21 17:10:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 21 17:12:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 21 17:12:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 21 17:12:00 2012] Initial guess for spatial extent in simple fitting = 14.72" [Mon May 21 17:12:00 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.061 [Mon May 21 17:12:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.72" [Tue May 22 06:51:14 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_src1.ximg exists [Tue May 22 06:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_src1.csv [Tue May 22 06:51:14 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_src1_1.ximg exists [Tue May 22 06:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_src1.csv [Tue May 22 06:51:14 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 22 06:51:15 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue May 22 06:51:15 2012] fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue May 22 06:51:15 2012] Fit fullrun_pn_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue May 22 21:23:04 2012] Warning, spatial fit 1 centroid is now closest to src. 3 [Tue May 22 21:23:04 2012] Vigneting correction estimate = 1.000000 [Tue May 22 21:23:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 22 21:23:04 2012] Assessing source extent using major axis lower bound [Tue May 22 21:23:04 2012] Source does appear to be extended [Tue May 22 21:23:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 22 21:23:04 2012] Source is confused with source 8 [Tue May 22 21:23:04 2012] Source is confused with source 10 [Tue May 22 21:24:15 2012] Counts = 18162.000000, rescaling region sizes by 3.000000 [Tue May 22 21:24:15 2012] XMMSAS src. selection expression = ellipse(24732.540000, 27819.946000, 2648.988076, 2648.988076, 0.000000, X, Y) [Tue May 22 21:24:15 2012] Writing source region out to fullrun_pn_xmm0110012701_pi300-10000_pass1_cl_src1_src.reg [Tue May 22 21:24:15 2012] Extracting stamp from image fullrun_pn_xmm0110012701_pi300-10000_cl_sm2.00.img.gz, (133, 168) - (437, 473) [Tue May 22 21:24:15 2012] XMMSAS bgd. selection expression = annulus(24732.540000, 27819.946000, 13244.940381, 26489.880762, X, Y) && !ellipse(25717.447000, 27718.223000, 3446.016099, 3446.016099, 0.000000, X, Y) && !ellipse(22831.937134, 27705.620422, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23785.334800, 26824.958000, 3542.904102, 3542.904102, 0.000000, X, Y) && !ellipse(27617.242000, 27046.454200, 4907.400141, 4907.400141, 0.000000, X, Y) && !ellipse(22753.103400, 29005.065600, 3959.568114, 3959.568114, 0.000000, X, Y) && !ellipse(27830.972000, 28967.308000, 7379.808212, 7379.808212, 0.000000, X, Y) && !ellipse(25734.582000, 27853.636000, 1352.576039, 1352.576039, 0.000000, X, Y) && !ellipse(26996.785851, 28234.099150, 3692.688106, 3692.688106, 359.980000, X, Y) && !ellipse(25644.502200, 28648.898600, 7385.376213, 3488.736100, 68.340600, X, Y) && !ellipse(24633.375600, 28854.069800, 1238.312036, 1238.312036, 0.000000, X, Y) && !ellipse(21286.483078, 28099.132935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22324.946000, 27120.392000, 1352.632039, 1352.632039, 0.000000, X, Y) && !ellipse(23780.857880, 25965.291199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27646.573600, 29343.776000, 1468.520042, 1468.520042, 0.000000, X, Y) && !ellipse(27437.778412, 24946.166168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.619568, 29716.653778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23349.959900, 31210.561768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26706.458400, 31210.922200, 931.864027, 931.864027, 0.000000, X, Y) && !ellipse(28996.301840, 26234.293400, 537.668015, 537.668015, 0.000000, X, Y) && !ellipse(22948.686737, 25967.502838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25113.717102, 31529.815765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23941.925232, 31208.851929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.471710, 30708.670959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.642426, 30135.240387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25939.380768, 29760.464417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.534088, 29704.148590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29098.844800, 26876.202200, 628.126418, 628.126418, 0.000000, X, Y) && !ellipse(26142.397000, 25734.929200, 621.123218, 621.123218, 0.000000, X, Y) && !ellipse(24847.752197, 25705.807220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.995178, 25114.882660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.212400, 24683.608000, 1187.000034, 1187.000034, 0.000000, X, Y) && !ellipse(25443.139862, 24367.592804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23659.738000, 24051.528000, 522.727215, 522.727215, 0.000000, X, Y) && !ellipse(25779.553314, 23634.026794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27072.273804, 24083.719727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24072.419922, 31721.609772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.092072, 32303.796631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.193359, 32203.731232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.627258, 29093.608673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29246.118866, 24651.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.388400, 22086.704000, 973.840028, 973.840028, 0.000000, X, Y) && !ellipse(24157.104736, 24316.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25139.460266, 22873.294525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23872.313019, 23076.460022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26595.361511, 22399.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25797.096000, 32322.096000, 1405.192040, 1405.192040, 163.445201, X, Y) [Tue May 22 21:24:15 2012] Writing fullrun_pn_xmm0110012701_pi300-10000_pass1_cl_src1.gif [Tue May 22 21:25:11 2012] Mean detx,y = (638.91, -35.54) [Tue May 22 21:25:21 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 22 21:42:40 2012] Binned source spectrum to 10 counts/bin [Tue May 22 21:42:41 2012] Setting source spectrum file to fullrun_pn_xmm0110012701_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue May 22 21:42:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110012701_pi300-10000_pass1_cl_src1_bgd.pi.gz