[Sun May 20 10:45:42 2012] Detection parameters:
  Position = (305.2, 312.9) = 11 24 23.41 -59 16 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6338.6 +/- 103.1
  Background counts = 304.6
  Rate = 0.4 +/- 0.006

[Sun May 20 10:45:46 2012] Off-axis axis estimate = 1.16'
[Mon May 21 07:12:06 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Mon May 21 07:12:06 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon May 21 07:12:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Mon May 21 07:12:06 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.01"
[Mon May 21 17:10:24 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 21 17:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src11.csv
[Mon May 21 17:10:24 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 21 17:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src11.csv
[Mon May 21 17:10:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:10:25 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 21 17:10:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 21 17:10:25 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 21 17:10:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 21 17:10:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:11:33 2012] Spatial fit model total counts = 25285.700000, observed total counts = 24257.000000
[Mon May 21 17:11:33 2012] Offset between fit and detection position for source 17 = 4.666508 pixels
[Mon May 21 17:11:33 2012] Warning, changing simple spatial fit ID from 11 to 4
[Mon May 21 17:11:33 2012] 25600.000033 total counts/ 25600.000000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.666508 pixels
  Position = (302.0, 309.5) = 11 24 25.25 -59 16 29.3
  Extent = 14.1" x 14.1", rotation angle = 0
  Source counts = 0.0 +/- 160.0
  Background counts = 25600.0
  Rate = 3e-09 +/- 0.01
  Deleting source due to low Poisson probability