[Sun May 20 10:45:41 2012] Detection parameters:
  Position = (295.0, 324.6) = 11 24 29.22 -59 15 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6849.4 +/- 105.8
  Background counts = 348.9
  Rate = 0.4 +/- 0.007

[Sun May 20 10:45:46 2012] Off-axis axis estimate = 1.91'
[Mon May 21 07:12:06 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon May 21 07:12:06 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon May 21 07:12:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.984
[Mon May 21 07:12:06 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.38"
[Mon May 21 17:10:24 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 21 17:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src8.csv
[Mon May 21 17:10:24 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 21 17:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src8.csv
[Mon May 21 17:10:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:10:25 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 21 17:10:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon May 21 17:10:25 2012] fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 21 17:10:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon May 21 17:10:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 17:11:33 2012] Warning, spatial fit 8 centroid is now closest to src. 7
[Mon May 21 17:11:33 2012] Spatial fit model total counts = 25848.200000, observed total counts = 24688.000000
[Mon May 21 17:11:33 2012] Offset between fit and detection position for source 10 = 0.470411 pixels
[Mon May 21 17:11:33 2012] Warning, changing simple spatial fit ID from 8 to 14
[Mon May 21 17:11:33 2012] 25421.700023 total counts/ 25421.700000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.470411 pixels
  Position = (295.1, 324.1) = 11 24 29.15 -59 15 25.8
  Extent = 15.5" x 15.5", rotation angle = 0
  Source counts = 0.0 +/- 159.4
  Background counts = 25421.7
  Rate = 2e-09 +/- 0.01
  Deleting source due to low Poisson probability