[Sun May 20 10:44:42 2012] Detection parameters:
  Position = (333.9, 309.0) = 11 24 7.13 -59 16 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2220.3 +/- 64.2
  Background counts = 158.8
  Rate = 0.2 +/- 0.004

[Sun May 20 10:44:45 2012] Off-axis axis estimate = 2.68'
[Sun May 20 17:47:53 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:47:53 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sun May 20 17:47:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765
[Sun May 20 17:47:53 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.77"
[Mon May 21 07:12:04 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src34.ximg exists
[Mon May 21 07:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src34.csv
[Mon May 21 07:12:04 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon May 21 07:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src34.csv
[Mon May 21 07:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 07:12:06 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon May 21 07:12:06 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon May 21 07:12:06 2012] Fit fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Mon May 21 17:11:10 2012] Spatial fit model total counts = 8574.290000, observed total counts = 8569.000000
[Mon May 21 17:11:10 2012] Offset between fit and detection position for source 36 = 0.856137 pixels
[Mon May 21 17:11:10 2012] 8001.150000 total counts/ 7550.470000 bgd. counts: snr = 5.186583
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.856137 pixels
  Position = (334.6, 309.4) = 11 24 6.73 -59 16 29.5
  Extent = 7.5 (6.5-9.2)", rotation angle = 0
  Source counts = 450.7 +/- 89.4
  Background counts = 7550.5
  Rate = 0.04 +/- 0.008
[Mon May 21 17:11:11 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:11:11 2012] Assessing source extent using major axis lower bound
[Mon May 21 17:11:11 2012] Source does appear to be extended
[Mon May 21 17:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 06:51:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 06:51:16 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue May 22 06:51:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.254
[Tue May 22 06:51:16 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.54"
[Tue May 22 13:06:29 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src33.ximg exists
[Tue May 22 13:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src33.csv
[Tue May 22 13:06:29 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue May 22 13:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src33.csv
[Tue May 22 13:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:06:31 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue May 22 13:06:31 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue May 22 13:06:31 2012] Fit fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue May 22 21:23:24 2012] Warning, spatial fit 33 centroid is now closest to src. 47
[Tue May 22 21:23:24 2012] Vigneting correction estimate = 1.000000
[Tue May 22 21:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 21:23:24 2012] Assessing source extent using major axis lower bound
[Tue May 22 21:23:24 2012] Source does appear to be extended
[Tue May 22 21:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00