[Sun May 20 10:44:41 2012] Detection parameters:
  Position = (317.9, 330.0) = 11 24 16.19 -59 15 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5684.5 +/- 98.1
  Background counts = 233.7
  Rate = 0.4 +/- 0.006

[Sun May 20 10:44:45 2012] Off-axis axis estimate = 2.69'
[Sun May 20 17:47:53 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:47:53 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sun May 20 17:47:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765
[Sun May 20 17:47:53 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.77"
[Mon May 21 07:12:04 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 21 07:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src11.csv
[Mon May 21 07:12:04 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 21 07:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src11.csv
[Mon May 21 07:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 07:12:05 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 21 07:12:05 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 21 07:12:05 2012] Fit fullrun_mos1_xmm0110012701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 21 17:11:10 2012] Spatial fit model total counts = 17783.000000, observed total counts = 17783.000000
[Mon May 21 17:11:10 2012] Offset between fit and detection position for source 15 = 0.382193 pixels
[Mon May 21 17:11:10 2012] 16857.810000 total counts/ 14013.800000 bgd. counts: snr = 24.024434
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.382193 pixels
  Position = (318.0, 330.4) = 11 24 16.19 -59 14 58.5
  Extent = 12.8 (11.3-14.7)", rotation angle = 0
  Source counts = 2844.0 +/- 129.8
  Background counts = 14013.8
  Rate = 0.2 +/- 0.01
[Mon May 21 17:11:11 2012] Vigneting correction estimate = 1.000000
[Mon May 21 17:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 17:11:11 2012] Assessing source extent using major axis lower bound
[Mon May 21 17:11:11 2012] Source does appear to be extended
[Mon May 21 17:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 17:11:11 2012] Source is confused with source 10
[Mon May 21 17:11:11 2012] Source is confused with source 26
[Tue May 22 06:51:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 06:51:16 2012] Initial guess for spatial extent in simple fitting = 12.77"
[Tue May 22 06:51:16 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.890
[Tue May 22 06:51:16 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.77"
[Tue May 22 13:06:28 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 22 13:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src11.csv
[Tue May 22 13:06:28 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 22 13:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src11.csv
[Tue May 22 13:06:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:06:30 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 22 13:06:30 2012] fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 22 13:06:30 2012] Fit fullrun_mos1_xmm0110012701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue May 22 21:23:24 2012] Warning, spatial fit 11 centroid is now closest to src. 45
[Tue May 22 21:23:24 2012] Vigneting correction estimate = 1.000000
[Tue May 22 21:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 21:23:24 2012] Assessing source extent using major axis lower bound
[Tue May 22 21:23:24 2012] Source does appear to be extended
[Tue May 22 21:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00